3D coverage is not only closer to the actual application environment, but also a research hotspot of sensor networks in recent years. For this reason, a node optimization coverage method under link model in passive monitoring system of three-dimensional wireless sensor network is proposed in this article. According to wireless link-aware area, the link coverage model in three-dimensional wireless sensor network is constructed, and the cube-based network coverage is used to represent the quality of service of the network. This model takes advantage of the principle that the presence of human beings can change the transmission channel of the link. On this basis, the intruder is detected by the data packets transmitted between the wireless links, and then the coverage area is monitored by monitoring the received signal strength of the wireless signal. Based on this new link awareness model, the problem of optimal coverage deployment of the receiving node is solved, that is, how to deploy the receiving node to achieve the optimal coverage of the monitoring area when the location of the sending node is given. In the process of optimal coverage, the traditional genetic algorithm and particle swarm optimization algorithm are introduced and improved. Based on the genetic algorithm, the particle swarm optimization algorithm which integrates the idea of simulated annealing is regarded as an important operator of the genetic algorithm, which can converge to the optimal solution quickly. The simulation results show that the proposed method can improve the network coverage, converge quickly, and reduce the network energy consumption. In addition, we set up a real experimental environment for coverage verification, and the experimental results verify the feasibility of the proposed method.

Due to the wider application of wireless sensor networks in real life, 3D coverage closer to the actual application environment has become a research hotspot of current sensor networks. To this end, this paper proposes a three-dimensional coverage deployment method based on RSS (Received Signal Strength) under a probabilistic model. According to the path loss of the wireless signal in the propagation process, the distance between the nodes can be roughly calculated, and the maximum distance between the nodes is defined by setting a threshold of the path loss, thereby further ensuring network connectivity and network quality. The probability coverage model is used and the cube-based network coverage is constructed. Based on this, the optimal coverage deployment problem in 3D-WSN is explored. Combining and improving the traditional particle swarm optimization algorithm can converge faster and avoid falling into local optimum. The simulation results show that the proposed method can converge quickly to improve network coverage and effectively reduce network energy consumption. In addition, we built a real experimental environment to verify the network quality by observing the RSSI (Received Signal Strength Indicator) changes. The experimental results verify the effectiveness of the proposed method.INDEX TERMS Three-dimensional coverage, probability model, RSS, network coverage, network quality.

Target sensing and information monitoring using wireless sensor networks have become an important research field. Based on two-dimensional plane research, information monitoring, and transmission for three-dimensional curved target events, due to the uneven deployment of nodes and failures in sensor networks, there are a lot of coverage loopholes in the network. In this paper, a method of detecting and repairing loopholes in monitoring the coverage of three-dimensional surface targets with hybrid nodes is proposed. In the target monitoring area where the hybrid nodes are randomly deployed, the three-dimensional surface cube is meshed, and the coverage loopholes are gradually detected according to the method of computational geometry, and then, the redundant mobile nodes around the coverage loopholes are selected. According to the calculated distance to cover the moving direction and distance of the loophole, the virtual force is used to adjust the mobile nodes to repair the coverage loopholes. Simulation results show that compared with other algorithms, this algorithm has a higher utilization rate of mobile nodes, uses fewer nodes to complete coverage, reduces network coverage costs, meets the overall network coverage requirements, and has lower mobile energy consumption and longer network life. The actual scene further verifies the good connectivity and high coverage of the whole network.

Aiming at the problems of low data transmission efficiency and uneven energy consumption caused by unreliable link communication in the routing process of wireless sensor networks, this article designs a routing game algorithm based on link quality. In this article, the index for evaluating link quality is defined first. Then, the link quality, node residual energy, and minimum jump transmission strategy are integrated into the utility function to establish a game model to determine the best next hop transmission node. Finally, the routing optimal transmission path is obtained according to the analysis of the existence of Nash equilibrium in the game. In the simulation experiment, the influence of the change of link quality parameters on the performance of the algorithm is analyzed, and the proposed algorithm is compared with non-linear weight particle swarm optimization (NWPSO) algorithm and Low Energy Adaptive Clustering Hierarchy-Improvement (LEACH-IMPT) algorithm in three aspects: the number of surviving nodes, network lifetime, and network energy consumption. The results show that the network lifetime of this method is 16.8% longer than that of LEACH-IMPT algorithm and 7.5% longer than that of NWPSO algorithm. This shows that the algorithm can effectively balance the network energy consumption and prolong the network life cycle. In addition, according to the routing path obtained in the simulation experiment, the optimality of its link quality is verified in the real experimental environment, and the experimental results prove the feasibility of the method in this article in practice.