No abstract

In this study, three improved versions of UiO-66 metal organic frameworks (MOFs) were synthesised successfully: Different ratios of Ca+2/Zr+4 were used to synthesise UiO-66, UiO-66-10%Ca and UiO-66-30%Ca. Batch adsorption experiments were achieved to remove MB from wastewater by UiO-66-Ca. UiO-66-10%Ca exhibited the highest adsorption capacity with maximum  MB adsorption capacity of 15 mg. g–1 in UiO-66-30%Ca while UiO-66 demonstrated lower MB loading. Langmuir and Freundlich models have been employed to describe isotherms. A kinetics study indicated pseudo first-order and pseudo second-order equations. In addition, an intraparticle diffusion model was utilised. The results presented here may facilitate the further enhancement of UiO-66 MOFs and advance the synthesis of multimetal MOFs in future research.

In this study, two improved versions of UiO-66 were successfully synthesised. Modified UiO-66 and UiO-66-Ce were characterised to confirm the integrity of the structure, the stability of functional groups on the surface and the thermal stability. Activated samples were used for removal harmful anionic dye (methyl orange) (MO) from wastewater. Batch adsorption process was relied to investigate the competition between those MOFs for removing MO from aqueous solution. Based on the results, at a higher initial concentration, the maximum MO uptake was achieved by UiO-66-Ce which was better than modified-UiO-66. They adsorbed 71.5 and 62.5 mg g-1 respectively. Langmuir and Freundlich isotherms were employed to simulate the experimental data. In addition, Pseudo first order and Pseudo second order equations were used to describe the dynamic behaviour of MO through the adsorption process. The high adsorption capacities on these adsorbents can make them promised adsorbents in industrial areas.

Metal organic frameworks (MOFs) are frequently used as adsorbents in adsorption processes to remove dyes from effluent produced by the textile industry. Today, dye contaminants have become an important environmental problem. One of these dyes is methylene blue (MB) and its removal from wastewater is a priority because it is persistent and nondegradable. MB is used in many industries although it has potential harmful effects on human and aquatic life and can be considered a hazardous chemical when in wastewater. The present study shows the potential applications for enhanced forms of UiO-66 MOFs, such as UiO-66, UiO-66-10%Al and UiO-66-30%Al. These forms were prepared to remove MB from wastewater using batch experiments. Characterisation of adsorbents were accomplished successfully using Fourier transform infrared, X-ray powder diffraction, Brunauer–Emmett–Teller surface area and thermogravimetric analysis techniques. To investigate equilibrium adsorptive behaviour, Langmuir and Freundlich isotherm models were tested against the experimental data. Based on linear regression correlation coefficient (R2), the Freundlich model described the equilibrium isotherm of MOF/MB better than the Langmuir model. Of all forms of UiO-66 MOF, UiO-66-10%Al had the maximum Langmuir adsorption capacity at 49.26 mg/g. A kinetics study examined pseudo first-order, pseudo second order and Elovich models to determine which could explain the sorption mechanism. While the pseudo second order and Elovich models showed a good fit with the experimental data, the correlation coefficient of the pseudo second-order model was the highest. These results indicate that adsorption of MB is controlled by a chemisorption mechanism. Further, intraparticle diffusion was utilised to describe the adsorption mechanism and determine the rate-limiting steps in the adsorption process.