No abstract

No abstract

No abstract

Although cold ring rolling (CRR) process is largely used in the manufacturing of profiled rings like bearing races, research on this purpose has been scant. In this study, based on a validated finite element (FE) model, CRR process is simulated regarding the variable and constant feed speeds of the mandrel roll which lead to constant and variable values of the ring's diameter growth rates respectively using a 3D rigid-plastic finite element method (FEM). Major technological problems involved in the process including plastic deformation behavior, strain distribution and its uniformity, Cockcroft and Latham damage field and final outer diameter of ring are fully investigated. The results of simulations would provide a good basis for process control especially feed speed controlled mills and guiding the design and optimization of both cold and hot ring rolling process.

Ring rolling process, especially hot rolling is characterized by 3D deformation, continuous change of thickness and height, high nonlinearity, non-steady flow and asymmetry. It involves both mechanical and thermal behaviors. Most mechanical and physical properties and boundary conditions are temperature related. The heat flow and stress analysis cannot be analyzed separately. In this study, both isothermal and coupled thermo-mechanical (CTM) 3D rigid-plastic finite element (FE) models of the hot ring rolling (HRR) process are developed to investigate their differences in accurately and quickly predicting the process. The results show that the latter should be more advantageous to the more accurate prediction and control of microstructure and properties of the ring.