No abstract

Premixed charge compression ignition (PCCI) is a clean and efficient alternative for classical diesel combustion. The concept of PCCI combustion is associated with early injection of the fuel whilst applying high exhaust gas recirculation (EGR) levels and operation with a highly lean mixture such that ignition takes place (well) after the injection event. Thus, it is possible to reduce soot and oxides of nitrogen (NO x ) emissions simultaneously. PCCI combustion is analyzed using a multi-zone model. In the multi-zone model, chemical mechanisms which are much more detailed compared to those used in computational fluid dynamics (CFD) approaches can be introduced directly. The CFD model is still used to predict the initial fuel stratification in the cylinder which is important to improve the quality of the model. For the analysis, dedicated experiments with n-heptane are used to evaluate the results of the model. In such a multi-zone model, 10 zones prove to be sufficient to describe the stratification with adequate resolution. It is observed that different fuel distributions have a large influence on the emissions when there is no mixing between the zones. To overcome this dependence, a basic inter-zonal diffusive 2 mixing is applied. The level of mixing is estimated with a sensitivity study. When the inter-zonal mixing is included, emission results become much less sensitive to the crank angle (CA) at which the charge stratification is sampled and the simulation is initialized.