The increased cell density and product titer in biomanufacturing have led to greater use of depth filtration as part of the initial clarification of cell culture fluid, either as a stand-alone unit operation or after centrifugation. Several recent studies have shown that depth filters can also reduce the concentration of smaller impurities like host cell proteins (HCP) and DNA, decreasing the burden on subsequent chromatographic operations. The objective of this study was to evaluate the HCP removal properties of the Pall PDH4 depth filter media, a model depth filter containing diatomaceous earth, cellulose fibers, and a binder. Experiments were performed with both cell culture fluid (CCF) and a series of model proteins with defined pI, molecular weight, and hydrophobicity chosen to match the range of typical HCP. The location of adsorbed (fluorescently labeled) proteins within the depth filters was determined using confocal scanning laser microscopy. Protein binding was greater for proteins that were positively charged and more hydrophobic, consistent with adsorption to the negatively charged diatomaceous earth. The lowest degree of binding was seen with proteins near their pI, which were poorly removed by this filter. These results provide new mechanistic insights into the factors governing the filter capacity and performance characteristics of depth filters containing diatomaceous earth that are widely used in the clarification of CCF.

No abstract

No abstract

No abstract

Significant increases in cell density and product titer have led to renewed interest in the application of depth filtration for initial clarification of cell culture fluid in antibody production. The performance of these depth filters will depend on the local pressure and velocity distribution within the filter capsule, but these are very difficult to probe experimentally, leading to challenges in both process design and scale‐up. We have used a combination of carefully designed experimental studies and computational fluid dynamics (CFD) to examine these issues in both lab‐scale (SupracapTM 50) and pilot‐scale (StaxTM) depth filter modules, both employing dual‐layer lenticular PDH4 media containing diatomaceous earth. The SupracapTM 50 showed a more rapid increase in transmembrane pressure and a more rapid DNA breakthrough during filtration of a Chinese Hamster Ovary cell culture fluid. These results were explained using CFD calculations which showed very different flow distributions within the modules. CFD predictions were further validated using measurements of the residence time distribution and dye binding in both the lab‐scale and pilot‐plant modules. These results provide important insights into the factors controlling the performance and scale‐up of these commercially important depth filters as well as a framework that can be broadly applied to develop more effective depth filters and depth filtration processes.