Zirconia-based ceramics offer strong restorations in dentistry, but the adhesive bond strength of resin cements to such ceramics is not optimal. This study evaluated the influence of surface treatments on the bond strength of resin cement to yttrium-stabilized tetragonal zirconia (Y-TZP) ceramic. Seventy-five plates of Y-TZP ceramic were randomly assigned to five groups (n = 15) according to the surface treatments [airborne particle abrasion, neodymium-doped yttrium aluminum garnet (Nd:YAG) laser irradiation (Fidelis Plus 3, Fotona; 2 W, 200 mJ, 10 Hz, with two different pulse durations 180 or 320 μs), glaze applied, and then 9.5 % hydrofluoric acid gel conditioned, control]. One specimen from each group was randomly selected, and specimens were evaluated with x-ray diffraction and SEM analysis. The resin cement (Clearfil Esthetic Cement, Kuraray) was adhered onto the zirconia surfaces with its corresponding adhesive components. Shear bond strength of each sample was measured using a universal testing machine at a crosshead speed of 1 mm/min. Bond strengths were analyzed through one-way ANOVA/Tukey tests. Surface treatments significantly modified the topography of the Y-TZP ceramic. The Nd:YAG laser-irradiated specimens resulted in both increased surface roughness and bond strength of the resin cement. The highest surface roughness and bond strength values were achieved with short pulse duration. Nd:YAG laser irradiation increased both surface roughness of Y-TZP surfaces and bond strength of resin cement to the zirconia surface.

No abstract