Cementitious grouts are being developed for use as sealing and support matrices (SSMs) in deep borehole disposal (DBD) where temperatures do not exceed 190 °C. They will seal radioactive waste containers into the bottom 2 km of holes drilled up to 5 km deep into the crystalline basement. The temperature and pressure is likely to be similar to those in hydrocarbon and geothermal energy wells, where grout placement and durability are affected. This paper reviews the potential cementing systems suitable for this application and explains why a single solution of a formulation of Class G oil well cement, silica flour, water, fluid loss additive, and retarding admixture has been selected. This type of formulation has been used extensively for over 100 years in well cementing. It should provide the short-term performance and durability required for an SSM, maintaining the seal around the waste packages within the disposal zone long after the boreholes are sealed back to the surface, and thus augmenting the safety case for DBD.

No abstract

Deep borehole disposal (DBD) provides an alternative to comparatively shallow mined repository concepts for many high-level radioactive wastes. Filling the annular space around the waste containers with cement grout will support them during placement and seal against ingress of groundwater. The elevated temperature and pressure ($120°C and 50 MPa) will cause acceleration of grout thickening and setting, so retardation is required. The DBD Research Group at The University of Sheffield has developed grouts based on class G oil well cement that use organic retarders, but their presence may increase the solubility of any radionuclides released from the waste packages. New DBD grout formulations using sodium phosphate and sodium borate as inorganic retarders are reported in this paper. To place the wet grout, the onset of thickening needs to be delayed for at least 4 h. Sodium borate was found to provide this retardation at 90°C (0·75% addition) and nearly retarded sufficiently at 120°C (1% addition). Sodium phosphate did not provide sufficient retardation at either temperature. Neither compounds influenced the phases formed, but may suppress the crystallisation of calcium silicate hydrates. This work demonstrates that the performance of these inorganic materials in this application is inferior to that of organic retarders.

No abstract

This is a repository copy of Gaseous carbonation of cementitious backfill for geological disposal of radioactive waste: Nirex Reference Vault Backfill.