An efficient maintenance plan is an important aspect for aeronautical companies to increase flight safety and decrease costs. Modern technologies are widely used in the Engine Health Monitoring (EHM) discipline to develop intelligent tools capable of monitoring the health status of engines. In this work, Artificial Neural Networks (ANNs) and in-detail Feed-Forward Neural Networks (FFNNs) were exploited in addition to a Kernel Principal Component Analysis (KPCA) to design an intelligent diagnostic tool capable of predicting the Performance Parameters (PPs) of the main components used as their health index. For this purpose, appropriate datasets containing information about degraded engines were generated using the Gas Turbine Simulation Program (GSP). Finally, the original datasets and the reduced datasets obtained after the application of KPCA to the original datasets were both used in the training and testing process of neural networks, and results were compared. The goal was to obtain a reliable intelligent tool useful for diagnostic purposes. The study showed that the degraded component detection and estimation of its performance achieved by using the hybrid KPCA–FFNNs were predicted with accurate and reliable performance, as demonstrated through detailed quantitative confusion matrix analysis.

Micro turbojets are used for propelling radio-controlled aircraft, aerial targets, and personal air vehicles. When compared to full-scale engines, they are characterized by relatively low efficiency and durability. In this context, the degraded performance of gas path components could lead to an unacceptable reduction in the overall engine performance. In this work, a data-driven model based on a conventional artificial neural network (ANN) and an extreme learning machine (ELM) was used for estimating the performance degradation of the micro turbojet. The training datasets containing the performance data of the engine with degraded components were generated using the validated GSP model and the Monte Carlo approach. In particular, compressor and turbine performance degradation were simulated for three different flight regimes. It was confirmed that component degradation had a similar impact in flight than at sea level. Finally, the datasets were used in the training and testing process of the ELM algorithm with four different input vectors. Two vectors had an extensive number of virtual sensors, and the other two were reduced to just fuel flow and exhaust gas temperature. Even with the small number of sensors, the high prediction accuracy of ELM was maintained for takeoff and cruise but was slightly worse for variable flight conditions.

Hybrid engines are becoming more and more widespread. Electric energy instead is a valid help to reduce the environmental impact. In hybrid engines, the number of components is higher and this results in a decrease in reliability. With Engine Health Monitoring (EHM) we mean the set of techniques used to monitor the health status of a system based on the values assumed by some related parameters. Artificial Intelligence (AI) methods are widely used nowadays in this discipline. In this paper, an EHM approach was developed to monitor the health status of some components constituting an hybrid turboshaft. The dynamic model of the hybrid electric power system is described in an accompanying paper. Feed-Forward Neural Network (FFNN) is used as AI tool to built the just cited system. The engine modelled with Simulink, was used to perform a series of steady-state simulations implementing a degradation condition in some selected components. The degradation condition was simulated by changing the value of the Performance Parameters (PPs) related to each of the selected components. The results of the simulation were used to obtain a dataset useful to train the FFNN to predict the values of the same PPs in a degraded case.

In aerospace sector, reliability is a crucial point. Modern technologies widely use Artificial Intelligence (AI) algorithms together with detections by sensors in order to design a health-based maintenance plan which stops an aircraft only when needed. In this work, an Engine Health Monitoring (EHM) system was developed by exploiting AI algorithms as Artificial Neural Networks (ANNs) trained to estimate a series of Performance Parameters (PPs) used as index of the health status of the main components constituting an engine. A neural network called Feed-Forward Neural Network (FFNN) in combination with a Principal Component Analysis (PCA) for feature reduction was used in this paper. The software Gas turbine Simulation Program (GSP) was used to generate a series of data containing information about engine performance under different flight conditions and compressor degradation levels. The datasets were subsequently used to train the neural networks to estimate the PPs of the degraded component. The final purpose of the present work is to develop an efficient diagnostic system useful to increase flight safety and decrease maintenance costs and fuel consumption.

Maintenance is crucial for aircraft engines because of the demanding conditions to which they are exposed during operation. A proper maintenance plan is essential for ensuring safe flights and prolonging the life of the engines. It also plays a major role in managing costs for aeronautical companies. Various forms of degradation can affect different engine components. To optimize cost management, modern maintenance plans utilize diagnostic and prognostic techniques, such as Engine Health Monitoring (EHM), which assesses the health of the engine based on monitored parameters. In recent years, various EHM systems have been developed utilizing computational techniques. These algorithms are often enhanced by utilizing data reduction and noise filtering tools, which help to minimize computational time and efforts, and to improve performance by reducing noise from sensor data. This paper discusses the various mechanisms that lead to the degradation of aircraft engine components and the impact on engine performance. Additionally, it provides an overview of the most commonly used data reduction and diagnostic and prognostic techniques.