No abstract

No abstract

Summary: The use of renewable raw materials in the polymer industries is becoming increasingly popular because of environmental concerns and the need to substitute fossil resources. Plant oils with triglyceride backbones can be chemically modified and used to synthesize polymers from renewable resources (biopolymers). In the present study, linseed oil was epoxidized using a chemo‐enzymatic method based on Candida Antarctica lipase B (CALB) as a biocatalyst and the modified linseed oil was cured using maleinated linseed oil and a commercial polyamide resin. The amount of epoxidation achieved depended on the amount of lipase used and was determined by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopies. With 20% (weight per weight) catalyst concentration based on the wt % of oil a degree of epoxidation of > 90% was achieved. The cross‐linking reaction of epoxidized linseed oil with the maleinated linseed oil and the polyamide resin was studied using differential scanning calorimetry (DSC). DSC traces showed that an increase in epoxidation degree lead to larger values for the exothermic enthalpy integrals of the curing reactions and hence to a higher reactivity of the linseed oil towards the cross‐linking agents.

No abstract

The relation between composition and mechanical performance of a series of binary polyolefin blends was studied in this article. A fractionation of these model compounds with temperature rising elution fractionation (TREF) was applied to study the possibility to fractionate industrially relevant heterophasic polyolefin systems. The separation quality according to molecular structures or chemical composition was found to be good for most of the systems, but especially the separation of ethylene‐propylene random copolymer and high density polyethylene by TREF turned out to be difficult if not impossible. An extensive mechanical characterisation including the determination of brittle‐to‐ductile transition curves showed significant effects of modifier type and amount. Toughness effects can be related primarily to the modulus differences between modifier and matrix. Compatibility and particle size only have a secondary influence, but must be considered for a detailed interpretation of the mechanics of the investigated systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013