No abstract

Microscopic split-ring-resonator (SRR) arrays are fabricated on 100 μm thick polyethylene naphthalate (PEN) films by femtosecond laser micro-lens array (MLA) lithography. The transmission properties of these metamaterials are characterized by THz Time Domain Spectroscopy (THz-TDS). Tunable resonance responses can be achieved by changing SRR structural design parameters. By stacking 2D PEN metamaterial films with different frequency responses together, a broadband THz filter with full width at half maximum (FWHM) of 0.38 THz is constructed. The bandwidth of the resonance response increases up to 4.2 times as compared to the bandwidths of single layer metamaterials. Numerical simulation reveals that SRR layers inside the multi-layer metamaterials are selectively excited towards specific frequencies within the broadband response. Meanwhile, more than one SRR layers respond to the chosen frequencies, resulting in the enhancement of the resonance properties. The multi-layer metamaterials provide a promising way to extend SRR based metamaterial operating region from narrowband to broadband with a tunable feature.

Current biopharmaceutical manufacturing systems are not compatible with portable or distributed production of biologics, as they typically require the development of single biologic-producing cell lines followed by their cultivation at very large scales. Therefore, it remains challenging to treat patients in short time frames, especially in remote locations with limited infrastructure. To overcome these barriers, we developed a platform using genetically engineered Pichia pastoris strains designed to secrete multiple proteins on programmable cues in an integrated, benchtop, millilitre-scale microfluidic device. We use this platform for rapid and switchable production of two biologics from a single yeast strain as specified by the operator. Our results demonstrate selectable and near-single-dose production of these biologics in <24 h with limited infrastructure requirements. We envision that combining this system with analytical, purification and polishing technologies could lead to a small-scale, portable and fully integrated personal biomanufacturing platform that could advance disease treatment at point-of-care.

In this work, we demonstrate all-electronically tunable terahertz quantum cascade lasers (THz QCLs) with MEMS tuner structures. A two-stage MEMS tuner device is fabricated by a commercial open-foundry process performed by the company MEMSCAP. This provides an inexpensive, rapid, and reliable approach for MEMS tuner fabrication for THz QCLs with a high-precision alignment scheme. In order to electronically actuate the MEMS tuner device, an open-loop cryogenic piezo nanopositioning stage is integrated with the device chip. Our experimental result shows that at least 240 GHz of single-mode continuous electronic tuning can be achieved in cryogenic environments (∼4  K) without mode hopping. This provides an important step toward realizing turn-key bench-top tunable THz coherent sources for spectroscopic and coherent tomography applications.