No abstract

No abstract

Currently the industrial heat demand is met by using expensive fossil fuels. Exclusive use of solar energy is not feasible due to the fluctuating pattern of solar radiation intensity. Solar hybridization with the existing heating system can be an appropriate solution to meet the process heat requirement of many industries. Concentrator Solar Thermal (CST) technologies can generate the medium temperature heat required for industrial processes. The present study was undertaken with an objective of comparing and analyzing the designed performance of the solar fields using the Compound Parabolic Concentrator (CPC) technology against the actual measured performance values for boiler feed water preheating application at two different locations in India. The optical efficiency of the CPC collector, 64.8%, obtained when tested as per part 5 of IS 16648:2017 was used for designing the solar fields as per the daily heat requirement. The performance of the installations at both the locations was monitored for a period of five months. The observed variation in the performance of each installation than the designed performance was compared and analyzed for the causes. The average variation in designed and measured performance was in the range of 9.0% to 9.8% for location 1 and 2 respectively, attributing to heat rejection from the collector attachments and fluid transfer lines, dust effect on the absorber and reflector of CPC, instrument’s uncertainty, other losses due to shadow effect, vacuum loss from the tubes, dislocation of tubes, heat removal and usage pattern etc. The reasons of the losses from both the fields were of the similar nature, which should be taken into account to design a solar thermal system to achieve predicted performance near to the designed performance. Preheating of boiler feed water is one of the potential applications of solar CPC technology.

No abstract

No abstract