The online hyphenation of chip-based high-performance liquid chromatography (chip-HPLC) with ion mobility spectrometry (IMS) via fully integrated electrospray emitters is introduced. A custom-built drift tube IMS with shifted potentials was developed in order to keep the IMS orifice electrically grounded, allowing for a robust coupling with chip-HPLC. Proof-of-concept studies with the newly developed analytical setup revealed the suitability of IMS as a promising and powerful detection concept for chip-based separation techniques. Comparison of IMS with fluorescence detection and electrospray ionization-mass spectrometry (ESI-MS) allowed a more detailed characterization of the IMS as a new detection method for chip-HPLC. Moreover, the analysis of a mixture consisting of three isobaric antidepressants demonstrated the performance of chip-HPLC/IMS as a miniaturized two-dimensional separation technique.

Improving the performance of chemical transformations catalysed by microbial biocatalysts requires a deep understanding of cellular processes. While the cellular heterogeneity of cellular characteristics, such as the concentration of high abundant cellular content, is well studied, little is known about the reactivity of individual cells and its impact on the chemical identity, quantity, and purity of excreted products. Biocatalytic transformations were monitored chemically specific and quantifiable at the single-cell level by integrating droplet microfluidics, cell imaging, and mass spectrometry. Product formation rates for individual Saccharomyces cerevisiae cells were obtained by i) incubating nanolitresized droplets for product accumulation in microfluidic devices, ii) an imaging setup to determine the number of cells in the droplets, and iii) electrospray ionisation mass spectrometry for reading the chemical contents of individual droplets. These findings now enable the study of whole-cell biocatalysis at single-cell resolution.

We report the first hyphenation of chip-electrochromatography (ChEC) with ion mobility spectrometry (IMS). This approach combines the separation power of two electrokinetically driven separation techniques, the first in liquid phase and the second in gas phase, with a label-free detection of the analytes. For achieving this, a microfluidic glass chip incorporating a monolithic separation column, a nanofluidic liquid junction for providing post-column electrical contact, and a monolithically integrated electrospray emitter was developed. This device was successfully coupled to a custom-built high-resolution drift tube IMS with shifted potentials. After proof-of-concept studies in which a mixture of five model compounds was analyzed in less than 80 s, this first ChEC−IMS system was applied to a more complex sample, the analysis of herbicides spiked in the wine matrix. The use of ChEC before IMS detection not only facilitated the peak allocation and increased the peak capacity but also enabled analyte quantification. As both, ChEC and IMS work at ambient conditions and are driven by high voltages, no bulky pumping systems are needed, neither for the hydrodynamic pumping of the mobile phase as in high-performance liquid chromatography nor for generating a vacuum system as in mass spectrometry. Accordingly, the approach has great potential as a portable analytical system for field analysis of complex mixtures.

We introduce the coupling of droplet microfluidics and ion mobility spectrometry (IMS) to address the challenges of label-free and chemical-specific detection of compounds in individual droplets. In analogy to the established use of mass spectrometry, droplet−IMS coupling can be also achieved via electrospray ionization but with significantly less instrumental effort. Because IMS instruments do not require high-vacuum systems, they are very compact, cost-effective, and robust, making them an ideal candidate as a chemical-specific end-of-line detector for segmented flow experiments. Herein, we demonstrate the successful coupling of droplet microfluidics with a custom-built high-resolution drift tube IMS system for monitoring chemical reactions in nL-sized droplets in an oil phase. The analytes contained in each droplet were assigned according to their characteristic ion mobility with limit of detections down to 200 nM to 1 μM and droplet frequencies ranging from 0.1 to 0.5 Hz. Using a custom sheath flow electrospray interface, we have further achieved the chemical-specific monitoring of a biochemical transformation catalyzed by a few hundred yeast cells, at single droplet level.

Ion mobility spectrometers (IMS) separate ions based on their ion mobility, which depends mainly on collision cross-section, mass, and charge of the ions. However, the performance is often hampered in electrospray ionization (ESI) by the appearance of multiple ion mobility peaks in the spectrum for the same analyte due to clustering and additional sodium adducts. In this work, we investigate the influence of solvents and buffer additives on the detected ion mobility peaks using ESI. Additionally, we investigate the effects of an additional chemical ionization (CI) induced by plasma ionization on the ions formed by electrospray. For this purpose, we coupled our high-resolution IMS with a resolving power of R p = 100 to a time-of-flight mass spectrometer. Depending on the analyte and the chosen additives, the ionization process can be influenced during the electrospray process. For the herbicide isoproturon, the addition of 5 mM sodium acetate results in the formation of the sodium adduct [M + Na]+, which is reflected in the ion mobility K 0 of 1.22 cm2/(V·s). In contrast, the addition of 5 mM ammonium acetate yields the protonated species [M + H]+ and a correspondingly higher K 0 of 1.29 cm2/(V·s). In some cases, as with the herbicide pyrimethanil, the addition of sodium acetate can completely suppress ionizations. By carefully choosing the solvent additive for ESI-IMS or additional CI, the formation of different ion mobility peaks can be observed. This can facilitate the assignment of ions to ion mobility peaks using IMS as a compact, stand-alone instrument, e.g., for on-site analysis.