Due to their good electrical conductivity and versatility, conductive polymers (CPs), in particular poly(3,4-ethylene dioxythiophene) (PEDOT):poly(styrene sulphonate) (PSS) have recently attracted considerable research interests in bioelectronics application. This research aims...

The depletion of petroleum-based resources and the adverse environmental problems, such as pollution, have stimulated considerable interest in the development of environmentally sustainable materials, which are composed of natural fiber–reinforced polymer composites. These materials could be tailored for a broad range of sustainable industrial applications with new surface functionalities. However, there are several challenges and drawbacks, such as composites processing production and fiber/matrix adhesion, that need to be addressed and overcome. This review could provide an overview of the technological challenges, processing techniques, characterization, properties, and potential applications of NFRPC for sustainable industrial applications. Interestingly, a roadmap for NFRPC to move into Industry 4.0 was highlighted in this review.

The disposal problems associated with the conventional plastic have imposed a long-standing quest of developing the degradable material. Indeed, blending of conventional plastic with renewable resources as the base materials is an attempt of imparting some level of biodegradability on the resulting composites. Thus, for this study, the effect of plasticized sago starch (plasticized) incorporation on the properties of low-density polyethylene (LDPE)-reinforced with kenaf core fiber (KCF) was evaluated. The ratio of LDPE/KCF was fixed at 80/20 and blended with the thermoplastic sago starch (TPSS) content ranging from 10 to 40 wt%. The blended samples were characterized by means of mechanical performance, Fourier transform infrared analysis, thermogravimetric and differential scanning calorimetry behavior, water uptake, and morphological properties. The experimental result shows that there is a gradual decrease in tensile strength, modulus, and elongation at break with an increase in TPSS loading. The degree of dispersion and adhesion of TPSS in LDPE/KCF composites revealed by scanning electron micrograph supports the findings of tensile properties. The thermal stability of the composite was clearly improved with the addition of TPSS. However, water uptake and hydrophilic character of the composite system tended to augment as the TPSS imparted to the composites.

The development of antimicrobial packaging has been growing rapidly due to an increase in awareness and demands for sustainable active packaging that could preserve the quality and prolong the shelf life of foods and products. The addition of highly efficient antibacterial nanoparticles, antifungals, and antioxidants to biodegradable and environmentally friendly green polymers has become a significant advancement trend for the packaging evolution. Impregnation of antimicrobial agents into the packaging film is essential for impeding or destroying the pathogenic microorganisms causing food illness and deterioration. Higher safety and quality as well as an extended shelf life of sustainable active packaging desired by the industry are further enhanced by applying the different types of antimicrobial packaging systems. Antimicrobial packaging not only can offer a wide range of advantages, but also preserves the environment through usage of renewable and biodegradable polymers instead of common synthetic polymers, thus reducing plastic pollution generated by humankind. This review intended to provide a summary of current trends and applications of antimicrobial, biodegradable films in the packaging industry as well as the innovation of nanotechnology to increase efficiency of novel, bio-based packaging systems.

The present work evaluated the potential of the addition of bentonite and feldspar as fillers on the mechanical and physical properties of lowdensity polyethylene (LDPE)/thermoplastic sago starch (TPSS)/kenaf core fiber (KCF) composites. For this purpose, 3 to15 phr of fillers were incorporated into LDPE/TPSS/KCF composites that were fabricated via a melt-mixing molding system. Results showed that the tensile strength and modulus were improved significantly with the addition of bentonite in comparison with feldspar. Thermal studies confirmed the improvement in thermal stability of composites filled with bentonite as well as feldspar. An increased percentage of water absorption was also observed in these composites compared with the control (LDPE/TPSS/KCF composites) system.