Archidendron jiringa seed peel extract was used to aid the coagulation-flocculation process to ultimately remove lead from synthetic residual water. The effectiveness of this method was studied to obtain an alternative approach that is easy to be handled with low cost and energy in removing the lead from residual water. Optimum parameters were analyzed to determine the effectiveness of lead removal, including pH, alum dose, and A. jiringa seed peel extract dose. A study on the coagulation-flocculation process with and without the aid of A. jiringa was also conducted. The optimum pH, the alum dose, and the A. jiringa seed peel extract dose were 9.0, 2.44 g/l, and 60.2 mg/l, respectively. The percentage of lead removal with the aid of A. jiringa seed peel extract was 79%, and the percentage was dropped to only 47% without the extract. A significantly higher rate in the coagulation-flocculation process due to the presence of A. jiringa seed peel extract proved its effectiveness in removing lead from wastewater.

Archidendron jiringa seed peel extract was used to aid the coagulation-flocculation process to ultimately remove lead from synthetic residual water. The effectiveness of this method was studied to obtain an alternative approach that is easy to be handled with low cost and energy in removing the lead from residual water. Optimum parameters were analyzed to determine the effectiveness of lead removal, including pH, alum dose, and A. jiringa seed peel extract dose. A study on the coagulation-flocculation process with and without the aid of A. jiringa was also conducted. The optimum pH, the alum dose, and the A. jiringa seed peel extract dose were 9.0, 2.44 g/l, and 60.2 mg/l, respectively. The percentage of lead removal with the aid of A. jiringa seed peel extract was 79%, and the percentage was dropped to only 47% without the extract. A significantly higher rate in the coagulation-flocculation process due to the presence of A. jiringa seed peel extract proved its effectiveness in removing lead from wastewater.

The demand for briquette is rising with the increasing of urbanization. Briquettes is mainly used as fuel and heating component. In addition, briquette is used in various industries for over the years. In this study, Imperata cylindrica and mango peels along with face mask were anticipated to boost the properties of the solid fuel briquette. Proximate analysis (moisture content, ash content, volatile matter and fixed carbon) and ultimate analysis (CHNS and calorific value) conducted for the briquette samples before and after the carbonisation process. The characteristics and properties of face mask, mango peels, and Imperata cylindrica are significant for the contribution of the optimal ratio of solid fuel briquettes made from these combination materials. Based on the findings, it can be concluded that briquettes made from Imperata cylindrica: mango peel produce the best results. The findings indicate that the briquette has low moisture content, 3.0%, high volatile matter, 37%, low ash content, 5.7%, and high fixed carbon, 54.8%. The analysis of carbon, hydrogen, nitrogen, and sulphur (CHNS) found that carbon content is 68.8%. The contents of hydrogen, sulphur, and nitrogen were 4.5%, 0.3%, and 0.96%, respectively. The calorific value obtained was 24.2 MJ kg-1.

In recent years, the world has witnessed an enormous effort to find a replacement energy source that is more environmentally friendly and renewable. Face masks that contain plastics lead to another management problem as they are non-biodegradable. Thus, by turning agricultural waste with plastic waste as an additive into beneficial products like briquettes, a solid waste problem can be minimized. In this study, Imperata cylindrica and mango peel commonly found in Malaysia were anticipated to boost the properties of solid fuel briquettes. Thus, the characterization of Imperata cylindrica, mango peel, and face mask waste as raw materials for the production of solid fuel briquettes is discussed in this paper. Proximate and ultimate analyses as well as Fourier transform-infrared (FTIR) were conducted to obtain the properties of the raw materials. FTIR results showed that face mask waste contained a methyl type group (CH3), and both agricultural wastes contained an oxygen type group (C–O–H). Based on the proximate analysis, face mask waste, mango peel, and Imperata cylindrica had low moisture contents, where mango peel had the highest moisture content (5.2%) followed by Imperata cylindrica (<1%) and face mask waste (<1%). Imperata cylindrica had the highest volatile matter content (94.6%) and the lowest ash content (2.3%), while mango peel contained the highest fixed carbon value, which was 16.1%. From the analyses conducted, face mask waste had the highest calorific value (26.19 MJ/kg−1). Face mask waste contained 63.6% carbon and 10% hydrogen. Meanwhile, Imperata cylindrica and mango peel contained 44% and 40% carbon and 6.15% and 6.95% hydrogen, respectively. The characteristics and properties of face mask waste, mango peel, and Imperata cylindrica are significant for the contribution of the optimal ratio of these materials to form solid fuel briquettes.