A linear cavity Brillouin fiber laser (BFL) is proposed and demonstrated for multi-wavelength operation. The BFL uses a single mode fiber (SMF) as a non-linear gain medium and an optical circulator to generate a linear cavity resonator. Two couplers are used to inject the Brillouin Pump (BP) and tap the BFL output respectively. The effect of the coupler ratio on the BFL performance is studied by keeping constant the ratio of the first coupler and varying the ratio of the second coupler. 11 simultaneous lines with a line spacing of 0.8 nm are obtained at a BP of 11.7 dBm and a coupler ratio of 95:5. The laser output is stable at room temperature with 5 lines obtained at above -30 dBm, and has the largest signal to noise ratio observed at the remaining lines. The proposed BFL has the advantage of being able to operate at any wavelength and is only dependent on the available BP wavelength. Wavelength, nmPower, dBm

No abstract

No abstract

No abstract

A mode-locked erbium-doped fiber laser (EDFL) is demonstrated using a highly concentrated erbium-doped fiber (EDF) as the gain medium in a ring configuration with and without a saturable absorber (SA). Without the SA, the proposed laser generates soliton pulses with a repetition rate of 12 MHz, pulse width of 1.11 ps and energy pulse of 1.6 pJ. By incorporating SA in the ring cavity, the optical output of the laser changes from soliton to stretched pulses due to the slight change in the group velocity dispersion. With the SA, a cleaner pulse is obtained with a repetition rate of 11.3 MHz, a pulse width of 0.58 ps and a pulse energy of 2.3 pJ.