In cases of bone density of >0.6 g/cm3 in the proximal femur (DEXA), the standard implants for the fixation of unstable trochanteric fractures could guarantee fixation without cutting out. The critical value of sufficient bone density in our few cases seems to be around 0.6 g/cm3 as measured by DEXA. Further investigation is needed to define the limits of bone mineral density for a successful osteosynthesis. An appropriate augmentation of the trabecular bone of the femoral head or a new design of the central loading device could increase the load-bearing capacity and thus help to reduce the cutting out phenomenon. Another alternative could be the primary implantation of an endoprosthesis in the treatment of these patients.

Screw-in performance is decisively influenced by the design of the threads. Modified trapezoid threads are the easiest to insert with excellent manual control, thus reducing the risk of intra-operative overturning. Flat threads also have a low screw-in resistance. Sharp threads have an unsatisfactory screw-in performance because the seating point cannot be "felt".