This work presents an in situ study of the adsorption/desorption behavior of ferrocene(Fc)-functionalized linear polymers on a gold surface covered with beta-cyclodextrin(beta-CD)-modified self-assembled monolayers (SAMs). The characterization of binary SAMs obtained with HS-(CH(2))(11)-EG(6)-N(3) and HS-(CH(2))(11)-EG(4)-OH (EG, ethylene glycol) was performed using a quartz crystal microbalance with dissipation monitoring (QCM-D), cyclic voltammetry, and contact angle measurements. The functionalization of SAMs with beta-CD was made via the "click" reaction between the beta-CD monoalkyne derivative and azide groups exhibited by SAMs. The formation of the host-guest complex between SAM-beta-CD and Fc-derivatized polymers (chitosan (CHI) and poly(allylamine hydrochloride) (PAH)) was studied by QCM-D. The viscoelastic model of Voinova was used to fit QCM-D curves recorded during the adsorption and electrochemically controlled desorption of CHI-Fc and PAH-Fc on SAM-beta-CD. Using QCM-D coupled to cyclic voltammetry, we demonstrated that CHI-Fc and PAH-Fc can be successfully deposited on a SAM-beta-CD-coated gold surface forming a stable multivalent inclusion complex between Fc moieties of polymer and beta-CD cavities of SAM. We also showed that all specifically attached polymer chains can be detached from the SAM-beta-CD-coated gold surface by applying an electric field.

No abstract

A novel sorbent was prepared by the functionalization of an inorganic support material, MCM-41, with N-methylglucamine for the uptake of boron from aqueous solutions prior to its determination by inductively coupled plasma optical emission spectrometry (ICP-OES). Characterization of the newly synthesized material was performed using BET, XRD, TEM, SEM and DRIFTS techniques, in addition to its C and N elemental content. Sorption behavior of the novel sorbent for boron was also investigated and found to obey Freundlich and Dubinin-Radushkevich (D-R) isotherm models. The maximum amount of B (as H 3 BO 3 ) that can be sorbed by the sorbent was calculated from the D-R isotherm and was found to be 0.8 mmol B g −1 of sorbent. The applicability of the new sorbent for the removal/preconcentration of boron from aqueous samples was examined by batch method. It was found that the sorbent can take up 85% of boron in 5 min whereas quantitative sorption is obtained in 30 min. Any pH greater than 6 can be used for sorption. Desorption from the sorbent was carried out using 1.0 M HNO 3 . The sorption efficiency of the new sorbent was also compared to that of Amberlite IRA 743, a commercial resin with N-methylglucamine functional groups. Within the experimental conditions employed, the new sorbent was found to have higher sorption efficiency than the commercial resin. For method validation, spike recovery tests were performed at various concentration levels in different water types and were found to be between 83-95 and 75-92% for ultra pure water and geothermal water, respectively.