Static mixers provide enhanced mixing via a motionless element inside a rigid pipe, and are widely used for continuous mixing and blending in industry. This study focuses on the emulsification of a silicon oil-in-water system stabilized by a surfactant through SMX+ ® static mixers involving no mass transfer between the two phases. The experiments covered a large domain of dispersed fraction from dilute conditions (5 %vol.) up to concentrated ones (60 %vol.) close to phase inversion and three different viscosities from 20 to 350 mPa s with transitional or turbulent flow regimes. The number of static mixers was studied until a constant drop size distribution monitored at line with a video probe was obtained. With the considered flow rates, only the five first SMX+ elements were necessary to achieve a complete drop breakup and coalescence equilibrium, the following ones only causing a supplementary pressure drop. The influence of the number of SMX+ and energy dissipation rate was found to be of first order