This study aims to investigate the technical efficiency of different subsurface drainage variants, in terms of the depth of the tile drains, spacing between the drain lines, type and thickness of the drain + filter complex, and the improvement procedures. Within the four variants, the discharge rate of the soil moisture excess was studied. In variants A and D, the spacing between drains is 20 m, and in the variants B and E, the spacing is 15 m. The depth of the tile drains is 0.8 m in variants D and E and 1.0 m in variants A and B. In variant A, tile drainage was combined with land shaping in the bedding system with top of ridges and furrows. Soil moisture was determined on checkpoints placed on drain cross section, at 2 m from drain lines, and of the middle of the drain spacing. In the version with land shaping, the drain lines located under the furrows favor the excess moisture removal. A similar technical efficiency was recorded in unimproved variant but with spacing between drains of 15 m. Best efficiency at removing excess water was registered in variant of the filtering material from ballast associated with flax strains.

No abstract