No abstract

The effect of dissolved humic acids on the recovery of PAHs from water samples has been investigated using a commercially available humic acid preparation as colloid model and a mixture containing the 16 EPA PAHs. The presence of humic acid reduced the extraction efficiency down to between 10 and 75%. An analytical protocol was therefore developed for the accurate determination of PAHs in the presence of humic acids based on isotope dilution mass spectrometry. The procedure compensates for losses due to sorption of PAHs and can be used for the determination of the total PAH concentration in water, i.e. dissolved PAHs plus PAHs adsorbed on colloids. To obtain reliable estimates it is essential to allow a certain time for equilibration between the isotope spike and the aqueous matrix which may vary between 5 and 24 h, in correlation with the water solubility of PAHs. The protocol allows one to recover the 16 PAHs studied at 94 to 105%. The expanded uncertainty of the measurements was 5-7% for all PAHs. Liquid-liquid extraction and solid-phase extraction in combination with the developed isotope dilution protocol performed equally well for the quantification of PAHs from water samples rich in colloidal material.

No abstract

During recent years, the awareness of quality assurance and quality control in environmental analyses has constantly increased, especially due to the implementation of new guidelines and regulations at both the national and international level. Achieving comparable results by using certified reference materials is one of the primary concerns of the scientific community. As a result, there is a growing demand for certified reference materials to cover different matrices and pollutants. Moreover, these CRMs should be in close relationship to the determinants and target concentrations required by environmental bodies and European Directives as well. Supplementary information to this paper presents an inventory of reference materials available on the market from different suppliers against the priority pollutants listed in the Water Framework Directive. These CRMs cover matrices such as water, sediment and biota. The use of CRMs in relationship to appropriate analytical methods and relevant determinants is discussed and the need for matrix-CRMs, particularly for organic pollutants is emphasised. The use of proficiency testing schemes as an alternative for the lack of appropriate CRMs and future trends in the production of CRMs within the BCR framework are also discussed.

No abstract