No abstract

No abstract

No abstract

Polymer electrolyte membranes (PEMs) are synthesized via in situ polymerization of vinylphosphonic acid (VPA) within a poly(2,5‐benzimidazole) (ABPBI) matrix. The characterization of the membranes is carried out by using Fourier transform infrared (FTIR) spectroscopy for the interpolymer interactions, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) for the thermal properties, and scanning electron microscopy (SEM) for the morphological properties. The physicochemical characterizations suggest the complexation between ABPBI and PVPA and the formation of homogeneous polymer blends. Proton conductivities in the anhydrous state (150 °C) measured by using impedance spectroscopy are considerable, at up to 0.001 and 0.002 S cm−1 for (1:1) and (1:2) molar ratios, respectively. These conductivities indicate significant improvements (>1000×) over the physically blended samples. The results shown here demonstrate the great potential of in situ preparation for the realization of new PEM materials in future high‐temperature and non‐humidified polymer electrolyte membrane fuel cell (PEMFC) applications.

Proton conducting polymer electrolyte membranes were produced by blending of poly(2,5-benzimidazole) (ABPBI) and poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS) at several stoichiometric ratios with respect to polymer repeating units. The membranes were characterized by using Fourier transform infrared spectroscopy for interpolymer interactions and scanning electron microscope for surface morphology. Thermal stability of the materials was investigated by thermogravimetric analysis. Glass transition temperatures of the samples were measured via differential scanning calorimetry. The spectroscopic measurements and water uptake studies indicate a complexation between ABPBI and PAMPS that inhibited polymer exclusion up on swelling in excess water. Proton conductivities of the anhydrous and humidified samples were measured using impedance spectroscopy. The proton conductivity of the humidified ABP-BI:PAMPS (1 : 2) blend showed a proton conductivity of 0.1 S/cm, which is very close to Nafion 117, at 20 C at 50% relative humidity.