The article presents a development of new machine safety devices, which provide protection of operating elements from overload. Theoretical calculations have been made in order to determine the optimum design, kinematic and dynamic parameters of safety devices. A test bench has been developed and experimental investigations have been conducted in order to determine basic parameters of overload clutches.Keywords: safety devices; overload clutch; design and kinematic parameters; dynamic load; test bench; operating elements of machines. J -equivalent drive moment of inertia; 21 J -equivalent drive half coupling moment rtia; 22 J -equivalent driven half coupling moment of inertia; 3with a screw operating element drive has been developed ( Figure 3). This model is described by the following set of equations:

Abstract. Generalized differential equations of relative particle motion over the internal surface of an inclined cylinder, which performs an oscillating motion, have been formulated. All the points of a cylinder trace ellipses in vertical planes. Such cases of cylinder oscillation, when either semi-axes or one of them is equal to zero, that is to say, a cylinder performs reciprocating motion, have been considered. The equations have been solved applying numerical methods and trajectories of relative particle motion over the surface of a cylinder have been built. Graphs of other kinematic characteristics as a timevarying function have been presented. Certain cases, when a cylinder axis is located horizontally or at an angle to a horizontal plane, have been considered.

Relative particle motion on the internal rough surface of a concave soil-tilling disk, which rotates around horizontal axis under a soil reaction force, has been considered. A disk blade is positioned in a vertical plane, which makes an incidence angle with the direction of the machine movement. This angle has its acceptable limit and when it exceeds the limit, it causes disk dragging. In the paper, it has been assumed that dragging was non-existent, the rotational rate of a disk is stable and it depends on stabilized velocity of the machine movement and on an incidence angle. When a machine is operated, soil particles get onto an internal disk surface and perform a relative motion, which determines the slipping trajectory of a particle on a disk surface. The trajectory of the absolute particle motion relative to a fixed coordinate system allows tracing the rise height of a particle after its gets onto a disk surface. Differential equations of particle motion have been developed and solved using numerical methods. A particle gets onto a disk with specified initial criteria, namely the direction of its entering on a disk and its initial velocity. Two models of particle motion on a disk have been considered. According to the first model, we assume that further particle motion after its getting onto a disk surface is performed due to the kinetic energy of a particle at the moment of its getting onto a disk surface. According to the second model, the backup force of other particles, which breaks the force of particle friction on a surface, is taken into account. Differential equations of particle motion have been developed in projections onto a fixed solid system of axes. Thus, the system includes three differential equations in three unknown functions. One of the unknown functions is the surface reaction force and the dependences, which describe relative particle motion on a disk surface. For the purpose of the quality of soil loosening, we conducted multivariate experiment to determine the area of the soil dissipation. On the basis of field experiments, it has been determined that the production process quality of tillage machine meets agrotechnical requirements.