The development of sensing interfaces can significantly improve the performance of biological sensors. Graphene oxide provides a remarkable immobilization platform for surface plasmon resonance (SPR) biosensors due to its excellent optical and biochemical properties. Here, we describe a novel sensor chip for SPR biosensors based on graphene-oxide linking layers. The biosensing assay model was based on a graphene oxide film containing streptavidin. The proposed sensor chip has three times higher sensitivity than the carboxymethylated dextran surface of a commercial sensor chip. Moreover, the demonstrated sensor chips are bioselective with more than 25 times reduced binding for nonspecific interaction and can be used multiple times. We consider the results presented here of importance for any future applications of highly sensitive SPR biosensing.

Imprint lithography has emerged as a reliable, reproducible, and rapid method for patterning colloidal nanostructures. As a promising alternative to top‐down lithographic approaches, the fabrication of nanodevices has thus become effective and straightforward. In this study, a fusion of interference lithography (IL) and nanosphere imprint lithography on various target substrates ranging from carbon film on transmission electron microscope grid to inorganic and dopable polymer semiconductor is reported. 1D plasmonic photonic crystals are printed with 75% yield on the centimeter scale using colloidal ink and an IL‐produced polydimethylsiloxane stamp. Atomically smooth facet, single‐crystalline, and monodisperse colloidal building blocks of gold (Au) nanoparticles are used to print 1D plasmonic grating on top of a titanium dioxide (TiO2) slab waveguide, producing waveguide‐plasmon polariton modes with superior 10 nm spectral line‐width. Plasmon‐induced hot electrons are confirmed via two‐terminal current measurements with increased photoresponsivity under guiding conditions. The fabricated hybrid structure with Au/TiO2 heterojunction enhances photocatalytic processes like degradation of methyl orange (MO) dye molecules using the generated hot electrons. This simple colloidal printing technique demonstrated on silicon, glass, Au film, and naphthalenediimide polymer thus marks an important milestone for large‐scale implementation in optoelectronic devices.

The challenges in plasmonic charge transfer on a large‐scale and low losses are systematically investigated by optical designs using 1D‐plasmonic lattice structures. These plasmonic lattices are used as couplers to guide the energy in an underneath sub‐wavelength titanium dioxide layer, resulting in the photonic crystal slabs. So far, photodetection is possible at energy levels close to the semiconductor bandgap; however, with the observed hybrid plasmonic–photonic modes, other wavelengths over the broad solar spectrum can be easily accessed for energy harvesting. The photo‐enhanced current is measured locally with simple two‐point contact on the centimeter‐squared nanostructure by applying a bias voltage. As lattice couplers, interference lithographically fabricated conventional gold grating provides an advantage in fabrication; this optical concept is extended for the first time toward colloidal self‐assembled nanoparticle chains to make the charge injection accessible for large‐scale at reasonable costs with possibilities of photodetection by electric field vectors both along and perpendicular to the grating lines. To discuss the bottleneck of unavoidable isolating ligand shell of nanoparticles in contrast to the directly contacted nanobars, polarization‐dependent ultrafast characterizations are carried out to study the charge injection processes in femtosecond resolution.

Advances in DNA nanotechnology allow the design and fabrication of highly complex DNA structures, uisng specific programmable interactions between smaller nucleic acid building blocks. To convey this concept to the fabrication of metallic nanoparticles, an assembly platform is developed based on a few basic DNA structures that can serve as molds. Programming specific interactions between these elements allows the assembly of mold superstructures with a range of different geometries. Subsequent seeded growth of gold within the mold cavities enables the synthesis of complex metal structures including tightly DNA‐caged particles, rolling‐pin‐ and dumbbell‐shaped particles, as well as T‐shaped and loop particles with high continuity. The method further supports the formation of higher‐order assemblies of the obtained metal geometries. Based on electrical and optical characterizations, it is expected that the developed platform is a valuable tool for a self‐assembly‐based fabrication of nanoelectronic and nanooptic devices.

The next generation of sensors requires a simple yet compact lab on chip-based precise optical detection mechanism where data interpretation can be achieved with minimum effort. Hereby, cost-efficient strategies of manufacturing both propagating surface plasmon polariton (SPP) and localized surface plasmon resonance (LSPR) sensors on flexible platforms are explored via mechanical instabilities and oblique-angled metal evaporation. Centimeter scaled dielectric grating structures produced by plasma oxidation of pre-stressed polydimethylsiloxane film have comprised the substrates, thus imparting inherent flexibility. Subsequently, both continuous and discontinuous 1D-metallic lattices are obtained via vapor deposition of gold at different angles. The optical isotropy (gold surface-grating) and anisotropy (gold edge-grating) are distinctly observed as a difference between forward and backward diffraction efficiencies, backed by analytical correlation to the observed orders. Supported with electromagnetic modeling, the SPP and LSPR excitations are experimentally characterized under reflectance and transmittance measurements, along with a demonstration of their sensing capabilities. The LSPR supported flexible sensor provides superiority in terms of sensitivity, which is investigated under mechanical deformations to exhibit consistency of the resonant wavelength. Such consistency is strategically unraveled via "finite element method" based approaches, thus providing a new paradigm of cost-efficient, large-scaled flexible sensors.