Researchers have shown considerable interest in finding a sustainable, low cost, and readily available substitute for the commercial calcium oxide (CaO) catalyst. In this work, raw chicken eggshell was modified by boiling and calcination at 900 C for 3 h. The x-ray diffraction characterization revealed that while the proportion of CaCO 3 in the raw and boiled samples was found to be 79.3 % and 99.2 % respectively, the CaCO 3 had been converted to 63.8 % CaO and CO 2 in the calcined sample. This was due to the thermal decomposition during calcination. The outcome of the infrared spectroscopy showed that the raw and boiled chicken eggshell presented a similar absorption profile with peaks at 1 394 cm À1 , 873 cm À1 , and 712 cm À1 , which were as a result of the presence of asymmetric stretch, out-of-plane bend, and in-plane bend vibration modes. The major peaks presented by the calcined sample at 3642 cm À1 can be attributed to the OAH stretching vibration and bending hydroxyl groups present in Ca(OH) 2 . The Brunauer-Emmett-Teller surface areas for the raw, boiled and calcined chicken eggshell were found to be 2.33 m 2 /g, 3.26 m 2 /g, and 4.6 m 2 /g respectively, indicating increased catalytic activity of the calcined sample. Overall, boiling was found to have a negligible effect on the chicken eggshell, while hightemperature calcination greatly affected the pore size, surface area, composition, and thermal decomposition profile of the chicken eggshell sample.

Vegetable oils have been used as a feedstock for fatty acid methyl ester (FAME) production. The high cost of neat vegetable oil and its impact on food security have necessitated its replacement as a feedstock for FAME by used vegetable oil, also known as waste cooking oil (WCO). This study compares the properties and fatty acid (FA) compositions of samples of neat vegetable oil with those of samples of WCO, collected from restaurants and takeaway outlets at the point of disposal. The samples were subjected to property determination and pyrolysis gas chromatography mass spectrometer (PYGCMS) analysis. Analysis showed that degree of usage and the type of food items originally fried in the oil substantially affected its properties and FA composition. Density of neat vegetable oil varied between 904.3 and 919.7 kg/m3 and of WCO between 904.3 and 923.2 kg/m3. The pH of neat vegetable oil varied between 7.38 and 8.63 and of WCO between 5.13 and 6.61. The PYGCMS analysis showed that neat palm oil contains 87.7% unsaturated FA and 12.3% saturated FA, whereas neat sunfoil contains 74.37% saturated FA and 25% polyunsaturated FA. Generally, neat vegetable oils consisted mainly of saturated FAs and polyunsaturated FAs, whereas the WCO contained mainly of saturated FAs and monounsaturated FAs. This research confirms the suitability of WCO as feedstock for FAME.

No abstract

Biofuel, a cost-effective, safe, and environmentally benign fuel produced from renewable sources, has been accepted as a sustainable replacement and a panacea for the damaging effects of the exploration for and consumption of fossil-based fuels. The current work examines the classification, generation, and utilization of biofuels, particularly in internal combustion engine (ICE) applications. Biofuels are classified according to their physical state, technology maturity, the generation of feedstock, and the generation of products. The methods of production and the advantages of the application of biogas, bioalcohol, and hydrogen in spark ignition engines, as well as biodiesel, Fischer–Tropsch fuel, and dimethyl ether in compression ignition engines, in terms of engine performance and emission are highlighted. The generation of biofuels from waste helps in waste minimization, proper waste disposal, and sanitation. The utilization of biofuels in ICEs improves engine performance and mitigates the emission of poisonous gases. There is a need for appropriate policy frameworks to promote commercial production and seamless deployment of these biofuels for transportation applications with a view to guaranteeing energy security.

Growing environmental concerns, increased population, and the need to meet the diversification of the source of global energy have led to increased demand for biofuels. However, the high cost of raw materials for biofuels production has continued to slow down the acceptability, universal accessibility, and affordability of biofuels. The cost of feedstock and catalysts constitutes a major component of the production cost of biofuels. Potato is one of the most commonly consumed food crops among various populations due to its rich nutritional, health, and industrial benefits. In the current study, the application of potato peel waste (PPW) for biofuel production was interrogated. The present state of the conversion of PPW to bioethanol and biogas, through various techniques, to meet the ever-growing demand for renewable fuels was reviewed. To satisfy the escalating demand for biohydrogen for various applications, the prospects for the synthesis of biohydrogen from PPW were proposed. Additionally, there is the potential to convert PPW to low-cost, ecologically friendly, and biodegradable bio-based catalysts to replace commercial catalysts. The information provided in this review will enrich scholarship and open a new vista in the utilization of PPW. More focused investigations are required to unravel more avenues for the utilization of PPW as a low-cost and readily available catalyst and feedstock for biofuel synthesis. The application of PPW for biofuel application will reduce the pump price of biofuels, ensure the appropriate disposal of waste, and contribute towards environmental cleanliness.