Delaying the placement of immediate fixtures by 6-8 weeks after extraction of the natural dentition allows for the elimination of associated infective processes, the achievement of maximum osteoblastic activity that theoretically could help the osseointegration process and complete wound covering that simplifies the placement of grafts or membranes. This study examines the healing associated with 21 fixtures in 14 patients. The fixtures were placed into sockets 6-8 weeks after tooth extraction without the use of barrier membranes or bone substitutes. Measurements were taken immediately prior to fixture placement and 3-6 months later at the abutment placement. Alveolar bone height, the remaining socket depth and diameter and the depth to which a 3.75 mm fixture could be inserted into the socket were measured. After fixture placement the vertical and horizontal measurements from the cover screw to the surrounding alveolar bone and the distance from the cover screw to the CEJ of the adjacent tooth were recorded. All fixtures were integrated at exposure with 1 failure during the follow-up period. The distance from the cover screw to the buccal plate decreased by a mean of 2.17 mm. There was an increase in the mean vertical bone height at all 4 surfaces. When horizontal defects were present, the mean vertical distance decreased from 2.5 +/- 0.37 mm to 0.36 +/- 0.64 mm. When horizontal defects were absent, the mean vertical distance decreased from 3.86 +/- 0.58 mm to 0.48 +/- 0.25 mm. There was also a marked decrease in the horizontal distance between the bone margin and the surface of the fixture from 1.6 +/- 1.73 mm to 0.02 +/- 0.02 mm. These results indicate a strong tendency for the defects to fill-in the horizontal plane and for bone growth to occur in the vertical plane to the height of the cover screw. In conclusion the delayed immediate placement of fixtures has a good short-term prognosis with bone regeneration occurring around the defect without the use of barrier membranes or bone substitutes.