We demonstrate a modified version of laser-induced fluorescence thermometry (LIFT) for mapping temperature gradients in the vicinity of small photothermal devices. Our approach is based on temperature sensitive fluorescent membranes fabricated with rhodamine B and polydimethylsiloxane (PDMS). Relevant membrane features for LIFT, such as temperature sensitivity, thermal quenching and photobleaching are presented for a range of 25 °C to 90 °C, and their performance is evaluated upon obtaining the temperature gradients produced in the proximity of optical fiber micro-heaters. Our results show that temperature measurements in regions as small as 750 µm x 650 µm, with a temperature resolution of 1 °C, can be readily obtained.

A wide variety of fiber devices can be created by adding special coatings on tapered sections of optical fibers. In this work we present the fundamentals for the fabrication of tapered optical fibers coated with functional polymers. The required aspects of light propagation in tapered sections of optical fibers are introduced and the relevant parameters enabling light interaction with external media are discussed. A special case of interest is the addition of polymeric coatings with prescribed thicknesses in the tapered sections allowing for adjusting the light propagation features. We assess the use of liquid polymer coatings with varying thicknesses along the taper profile that can be tailored for tuning the transmission features of the devices. Hence, we introduce a methodology for obtaining coatings with predefined geometries whose optical properties will depend on the polymer functionality. As demonstrated with numerical simulations, the use of functional polymer coatings in tapered optical fibers allows for obtaining a wide variety of functionalities. Thus, controlled polymer coating deposition may provide a simple means to fabricate fiber devices with adjustable transmission characteristics.

We propose a detailed method for the interconnection between optical fibers and waveguides of photonic integrated circuits. Appropriate modal transmission is accomplished by matching the mode field diameters from both waveguide structures. Links from one structure to another are created by an interconnecting waveguide, maintaining a fixed coupling efficiency as its size is modified to adjust to the target waveguide core. This tailored transition acts as a mode field adapter, equalizing the transmission among multiple modes and reducing the mode-dependent losses while coupling. We present an algorithm to design the mode field adapter based on matching the effective mode areas using the power overlap integral. A study case considering a polymer photonic integrated device immediately connected to a few-mode fiber is analyzed. Coupling efficiencies over 90% for every transmitted mode are achieved, showing an evident improvement compared to typical approaches only matching core sizes. Detailed comparison of the results for each transmission mode is presented. This same procedure can be used to interconnect optical waveguides with different refractive index profiles and core geometry.