ROSEO-BIWT is a new Building-Integrated Wind Turbine (BIWT) intended for installation on the edge of buildings. It consists of a Savonius wind turbine and guiding vanes to accelerate the usual horizontal wind, together with the vertical upward air stream on the wall. This edge effect improves the performance of the wind turbine, and its architectural integration is also beneficial. The hypothetical performance and design configuration were studied for a university building in Eibar city using wind data from the ERA5 reanalysis (European Centre for Medium-Range Weather Forecasts’ reanalysis), an anemometer to calibrate the data, and the actual small-scale behavior in a wind tunnel. The data acquired by the anemometer show high correlations with the ERA5 data in the direction parallel to the valley, and the calibration is therefore valid. According to the results, a wind speed augmentation factor of three due to the edge effect and concentration vanes would lead to a increase in working hours at the rated power, resulting annually in more than 2000 h.

No abstract

In this work, a cost-effective wind resource method specifically developed for the ROSEO-BIWT (Building Integrated Wind Turbine) and other Building Integrated Wind Turbines is presented. It predicts the wind speed and direction at the roof of an previously selected building for the past 10 years using reanalysis data and wind measurements taken over a year. To do so, the reanalysis wind speed data is calibrated against the measurements using different kinds of quantile mapping, and the wind direction is predicted using random forest. A mock-up of a building and a BIWT were used in a wind tunnel to perform a small-scale experiment presented here. It showed that energy production is possible and even enhanced over a wide range of attack angles. The energy production estimations made with the best performing kind of calibration achieved an overall relative error of 6.77% across different scenarios.

No abstract

No abstract