No abstract

In this study, a novel carbon nanotube (CNT) based nanocatalyst (Ni@Pd/CNT) was synthesized by modifying CNTs using Ni@Pd core–shell nanoparticles (NPs).

No abstract

In this study, a clinoptilolite was applied to remove ammonium from piggery wastewater. The performance of ammonium removal and the correspondingly mechanisms were discussed. Under the optimal conditions of clinoptilolite dosage of 12 g/L, solution pH value of 8.3, shaking speed of 280 rpm and contact time of 55 min obtained by using response surface methodology (RSM), 19.7 mg of ammonium can be adsorbed onto 1 g of clinoptilolite, which was declined when metal cations were presented in the piggery wastewater. The ammonium adsorption process by the clinoptilolite can be well fitted by Langmuir isotherm with a spontaneous nature and pseudo–second–order kinetics model. Furthermore, column study showed that to some extent, the increased flow rate was beneficial to the removal of ammonium, and the ammonium adsorption capacity of clinoptilolite in column study was much higher than those in batch study.

The biological reduction of ferrous ethylenediaminetetraacetic acid (EDTA-FeII-NO and EDTA-FeIII) is an important process in the integrated electrobiofilm reduction method, and it has been regarded as a promising alternative method for removing NO x from industrial boiler flue gas. EDTA-FeII-NO and EDTA-FeIII are crucial substrates that should be biologically reduced at a high rate. However, they inhibit the reduction processes of one another when these two substrates are presented together, which might limit further promotion of the integrated method. In this study, an integrated electrobiofilm reduction system with high reduction rates of EDTA-FeII-NO and EDTA-FeIII was developed. The dynamic changes of microbial communities in the electrobiofilms were mainly investigated to analyze the changes during the reduction of these two substrates under different conditions. The results showed that compared to the conventional chemical absorption-biological reduction system, the reduction system exhibited better performance in terms of resistance to substrate shock loading and high microbial diversities. High-throughput sequencing analysis showed that Alicycliphilus, Enterobacteriaceae, and Raoultella were the dominant genera (>25% each) during the process of EDTA-FeII-NO reduction. Chryseobacterium had the ability to endure the shock loading of EDTA-FeIII, and the relative abundance of Chryseobacterium under abnormal operation conditions was up to 30.82%. Ochrobactrum was the main bacteria for reducing nitrate by electrons and the relative abundance still exhibited 16.11% under shock loading. Furthermore, higher microbial diversity and stable reactor operation were achieved when the concentrations of EDTA-FeII-NO and EDTA-FeIII approached the same value (9 mmol·L−1).