No abstract

Two different types of surface modifiers, 3-aminopropyltriethoxysilane and formamide, were applied to carbon black (CB) particles to lower electrical resistivity of polymer composites prepared by treated CB. Two different matrices, low-density polyethylene and nylon 6, were chosen to compound with surface modified CB. Surface energy of CB was increased by adding amine or amide functional groups during surface treatment of CB. According to electron spectroscopy for chemical analysis (ESCA), chemical modification in surface chemistry of CB was obtained with the chemicals used for the treatment due to the nitrogen atoms in their structures, which may act as dopant atom. As a result of this, electrical resistivity of composites prepared by treated CB decreased. In addition, there was not any significant change in tensile strength and tensile modulus of the composites with the surface treatment.

In this study, it was aimed to prepare polyvinyl borate/polyvinyl alcohol blend nanofibers by electrospinning process. Polyvinyl borate was synthesized by the condensation reaction of polyvinyl alcohol and boric acid. Polyvinyl borate itself was not suitable for electrospinning process. To improve fiber formation capability, polyvinyl borate was blended with polyvinyl alcohol before electrospinning process. A series of nanofibers with various polyvinyl borate concentrations in polyvinyl alcohol were prepared. Homogeneous and highly porous mat containing 100-250 nm diameter nanofibers were obtained by electrospinning process. According to the FTIR results, boron atoms were found to be integrated into the polymer network. There is not any significant effect of polyvinyl borate content on fiber morphologies according to SEM images. The blend composition with the highest polyvinyl borate content was found to be suitable for thermally stable nanofiber formation according to the TGA results.

No abstract