With the current drive of automotive and technology companies towards producing vehicles with higher levels of autonomy, it is inevitable that there will be an increasing number of SAE level L4-L5 autonomous vehicles (AVs) on roadways in the near future. Microscopic traffic simulators that simulate realistic traffic flow are crucial in studying, understanding and evaluating the fuel usage and mobility effects of having a higher number of autonomous vehicles (AVs) in traffic under realistic mixed traffic conditions including both autonomous and non-autonomous vehicles. In this paper, L4-L5 AVs with varying penetration rates in total traffic flow were simulated using the microscopic traffic simulator Vissim on urban, mixed and freeway roadways. The roadways used in these simulations were replicas of real roadways in and around Columbus, Ohio, including an AV shuttle routes in operation. The road-specific information regarding each roadway, such as the number of traffic lights and positions, number of STOP signs and positions, and speed limits, were gathered using OpenStreetMap with SUMO. In simulating L4-L5 AVs, the All-Knowing CoEXist AV and a vehicle with Wiedemann 74 driver were taken to represent AV and non-AV driving, respectively. Then, the driving behaviors, such as headway time and car following, desired acceleration and deceleration profiles of AVs, and the non-AVs' car following and lane change models were modified. The effect of having varying penetration rates of L4-L5 AVs were then evaluated using criteria such as average fuel consumption, existence of queues and their average/maximum length, total number of vehicles in the simulation, average delay experience by all vehicles, total number of stops experienced by all vehicles, and total emission of CO, NOx and volatile organic compounds (VOC) from the vehicles in the simulation. The results show that while increasing penetration rates of L4-L5 AVs generally improve overall fuel efficiency and mobility of the traffic network, there were also cases when the opposite trend was observed.

No abstract

Connectivity between ground vehicles can be utilized and expanded to include aerial vehicles for coordinated missions. Using Vehicle-to-Everything (V2X) communication technologies, a communication link can be established between Connected and Autonomous vehicles (CAVs) and Unmanned Aerial vehicles (UAVs). Hardware implementation and testing of a ground-to-air communication link are crucial for real-life applications. In this paper, the V2X communication and coordinated mission of a CAV & UAV are presented. Four methods were utilized to establish communication between the hardware and software components, namely Dedicated Short Range communication (DSRC), User Datagram Protocol (UDP), 4G internet-based WebSocket and Transmission Control Protocol (TCP). These communication links were used together for a real-life use case scenario called Quick Clear demonstration. In this scenario, the first aim was to send the accident location information from the CAV to the UAV through DSRC communication. On the UAV side, the wired connection between the DSRC modem and Raspberry Pi companion computer was established through UDP to get the accident location from CAV to the companion computer. Raspberry Pi first connected to a traffic contingency management system (CMP) through TCP to send CAV and UAV location, as well as the accident location, information to the CMP. Raspberry Pi also utilized WebSocket communication to connect to a web server to send photos that were taken by the camera that was mounted on the UAV. The Quick Clear demonstration scenario was tested for both a stationary test and dynamic flight cases. The latency results show satisfactory performance in the data transfer speed between test components with UDP having the least latency. The package drop percentage analysis shows that the DSRC communication showed the best performance among the four methods studied here. All in all, the outcome of this experimentation study shows that this communication structure can be utilized for real-life scenarios for successful implementation.

No abstract

No abstract