Esterification kinetics of acetic acid with methanol was studied with solid acid catalyst in an isothermal batch reactor at 333À353 K. Different types of ion exchange catalyst (Indion 130, Indion 190, and Amberlyst 15 wet) were used for the esterification of acetic acid. It was found that Indion 130 was an effective catalyst for acetic acid esterification. The effects of stirrer speed, reaction temperature, initial reactant concentration, and catalyst loading on reaction rate were investigated and optimized. Temperature dependence of the reaction rates and activation energies was determined by an Arrhenius plot. A complete kinetic equation for describing the reaction catalyzed by Indion 130 was developed. This equation can be used in the simulation and design of the catalytic distillation column for the synthesis of methyl acetate.

The complex nature of diclofenac limits its biological degradation, posing a serious threat to aquatic organisms. Our present work aims to eliminate diclofenac from wastewater through photocatalytic degradation using TiO-SnO mixed-oxide catalysts under various operating conditions such as catalyst loading, initial diclofenac concentration and initial pH. Different molar ratios of Ti-Sn (1:1, 5:1, 10:1, 20:1 and 30:1) were prepared by the hydrothermal method and were characterized. The results indicated that addition of Sn in small quantity enhances the catalytic activity of TiO. Energy Band gap of the TiO-SnO catalysts was found to increase with an increase in Tin content. TiO-SnO catalyst with a molar ratio of 20:1 was found to be the most effective when compared to other catalysts. The results suggested that initial drug concentration of 20 mg/L, catalyst loading of 0.8 g/L and pH 5 were the optimum operating conditions for complete degradation of diclofenac. Also, the TiO-SnO catalyst was effective in complete mineralization of diclofenac with a maximum total organic carbon removal of 90% achieved under ultraviolet irradiation. The repeatability and stability results showed that the TiO-SnO catalyst exhibited an excellent repeatability and better stability over the repeated reaction cycles. The photocatalytic degradation of diclofenac resulted in several photoproducts, which were identified through LC-MS.

No abstract

No abstract

The objective of this study is to assess the adsorption potential of cobalt (II) using cuttlefish bones. The bones were treated with 0.01 N HCl to enhance the heavy metal uptake. The adsorbent was characterized using scanning electron microscope and energy dispersive X-ray spectrometer. An adsorption study was conducted in a batch system to optimize process variables such as initial concentration of cobalt (II), pH, sorbent loading, particle size, process temperature, and contact time. The optimal pH was found to be 9. The kinetic data followed the pseudosecond-order kinetic model, and the equilibrium time was found to be 20 min. In the first minute of the adsorption process, 50% of the cobalt (II) was adsorbed by the cuttle bones. Adsorption isotherms were expressed by the Langmuir and Freundlich adsorption models. The Langmuir adsorption model fits the experimental data reasonably well compared with the Freundlich model. The maximum adsorption capacity of this new sorbent was found to be 76.6 mg g À1 at 40 C. Thermodynamic parameters, including the Gibbs free energy (ΔG o ), enthalpy (ΔH o ), and entropy (ΔS o ), indicated that the adsorption of cobalt (II) by cuttlefish bones was feasible and endothermic at a temperature range of 20 -40 C.