No abstract

Experimental and kinetic modeling of kerosene-type fuels is reported in the present work with special emphasis on the low-temperature oxidation phenomenon relevant to gas turbine premixing conditions. Experiments were performed in an atmospheric pressure, tubular flow reactor to measure ignition delay time of kerosene (fuel–oil No. 1) in order to study the premature autoignition of liquid fuels at gas turbine premixing conditions. The experimental results indicate that the ignition delay time decreases exponentially with the equivalence ratio at fuel-lean conditions. However, for very high equivalence ratios (>2), the ignition delay time approaches an asymptotic value. Equivalence ratio fluctuations in the premixer can create conditions conducive for autoignition of fuel in the premixer, as the gas turbines generally operate under lean conditions during premixed prevaporized combustion. Ignition delay time measurements of stoichiometric fuel–oil No. 1∕air mixture at 1 atm were comparable with that of kerosene type Jet-A fuel available in the literature. A detailed kerosene mechanism with approximately 1400 reactions of 550 species is developed using a surrogate mixture of n-decane, n-propylcyclohexane, n-propylbenzene, and decene to represent the major chemical constituents of kerosene, namely n-alkanes, cyclo-alkanes, aromatics, and olefins, respectively. As the major portion of kerosene-type fuels consists of alkanes, which are relatively more reactive at low temperatures, a detailed kinetic mechanism is developed for n-decane oxidation including low temperature reaction kinetics. With the objective of achieving a more comprehensive kinetic model for n-decane, the mechanism is validated against target data for a wide range of experimental conditions available in the literature. The data include shock tube ignition delay time measurements, jet-stirred reactor reactivity profiles, and plug-flow reactor species time–history profiles. The kerosene model predictions agree fairly well with the ignition delay time measurements obtained in the present work as well as the data available in the literature for Jet A. The kerosene model was able to reproduce the low-temperature preignition reactivity profile of JP-8 obtained in a flow reactor at 12 atm. Also, the kerosene mechanism predicts the species reactivity profiles of Jet A-1 obtained in a jet-stirred reactor fairly well.

No abstract

Ignition delay times of a “real” synthetic jet fuel (S8) were measured using an atmospheric pressure flow reactor facility. Experiments were performed between 900 K and 1200 K at equivalence ratios from 0.5 to 1.5. Ignition delay time measurements were also performed with JP8 fuel for comparison. Liquid fuel was prevaporized to gaseous form in a preheated nitrogen environment before mixing with air in the premixing section, located at the entrance to the test section of the flow reactor. The experimental data show shorter ignition delay times for S8 fuel than for JP8 due to the absence of aromatic components in S8 fuel. However, the ignition delay time measurements indicate higher overall activation energy for S8 fuel than for JP8. A detailed surrogate kinetic model for S8 was developed by validating against the ignition delay times obtained in the present work. The chemical composition of S8 used in the experiments consisted of 99.7 vol% paraffins of which approximately 80 vol% was iso-paraffins and 20% n-paraffins. The detailed kinetic mechanism developed in the current work included n-decane and iso-octane as the surrogate components to model ignition characteristics of synthetic jet fuels. The detailed surrogate kinetic model has approximately 700 species and 2000 reactions. This kinetic mechanism represents a five-component surrogate mixture to model generic kerosene-type jets fuels, namely, n-decane (for n-paraffins), iso-octane (for iso-paraffins), n-propylcyclohexane (for naphthenes), n-propylbenzene (for aromatics) and decene (for olefins). The sensitivity of iso-paraffins on jet fuel ignition delay times was investigated using the detailed kinetic model. The amount of iso-paraffins present in the jet fuel has little effect on the ignition delay times in the high temperature oxidation regime. However, the presence of iso-paraffins in synthetic jet fuels can increase the ignition delay times by two orders of magnitude in the negative temperature (NTC) region between 700 K and 900 K, typical gas turbine conditions. This feature can have a favorable impact on preventing flashback caused by the premature autoignition of liquid fuels in lean premixed prevaporized (LPP) combustion systems.

No abstract