Ohmic contacts to GaAs/AlGaAs core/shell nanowires are prepared by using a Ni/AuGe/Ni/Au layer system. In contrast to Ohmic contacts to planar GaAs/AlGaAs layer systems here, relatively low alloying temperatures are used in cylindrical geometry. Lowest resistances are found for annealing temperatures of 320 °C and 340 °C. For annealing temperatures exceeding 360 °C, the nanowires degraded completely. Nanowires annealed under optimized conditions preserved their Ohmic characteristics even down to temperatures of 4 K.

We studied Cu self-dynamics and liquid density of Zr66.7Cu33.3, Zr35.5Cu64.5, Zr36Cu64, and Zr38.2Cu61.8 liquids using a combination of containerless processing techniques and quasielastic neutron scattering. We show that the composition dependence of the Cu self-dynamics is qualitatively controlled by the liquid packing density. It is hence monotonic within a narrow composition range and not sensitive to small composition variations. Similarly, replacing Cu by Ni results in a slower atomic dynamics in the Zr-Ni liquids, as a consequence of the more dense packing. This is in contrast to the strong composition dependence of the glass-forming behaviour, and the better glass-forming ability of the Zr-Cu over Zr-Ni alloys, which usually favours sluggish liquid dynamics. Thus, in the Zr-Cu case, the glass-forming ability is not directly correlated with liquid dynamics and packing density.

By means of benchmarking reduced gravity experiments, we have verified the measured viscosity of binary Zr-Ni glass forming liquids utilizing the oscillating drop technique combined with ground-based electrostatic levitation (ESL). Reliable viscosity data can be obtained as long as internal viscous damping of a single oscillation mode of a levitated drop dominates external perturbations. This can be verified by the absence of a sample mass dependence of the results. Hence, ESL is an excellent tool for studying the viscosity of metallic glass forming melts in the range of about 10–250 mPa s, with sample masses below 100 mg. To this end, we show that, for binary Zr-Ni melts, the viscosity is qualitatively controlled by the packing density.

No abstract

No abstract