The status of experimental research and ongoing development of plasma cathode electron guns in recent years is reviewed, including some novel upgrades and applications to various technological fields. The attractiveness of this kind of e-gun is due to its capability of creating high current, broad or focused beams, both in pulsed and steady-state modes of operation. An important characteristic of the plasma cathode electron gun is the absence of a thermionic cathode, a feature which leads to long lifetime and reliable operation even in the presence of aggressive background gas media and at fore-vacuum gas pressure ranges such as achieved by mechanical pumps. Depending on the required beam parameters, different kinds of plasma discharge systems can be used in plasma cathode electron guns, such as vacuum arcs, constricted gaseous arcs, hollow cathode glows, and two kinds of discharges in crossed E×B fields: Penning and magnetron. At the present time, plasma cathode electron guns provide beams with transverse dimension from fractional millimeter up to about one meter, beam current from microamperes to kiloamperes, beam current density up to about 100 A/cm2, pulse duration from nanoseconds to dc, and electron energy from several keV to hundreds of keV. Applications include electron beam melting and welding, surface treatment, plasma chemistry, radiation technologies, laser pumping, microwave generation, and more.

TITAN is a new type of ion source capable of generating high current, wide aperture beams of gas and metal ions from a broad range of elements: Mg, Al, Ti, Cr, Fe, Co, Ni, Sm, Zn, W, Pb, Ta, Re, Y, C, He, N, Ar, and Xe. A specific feature of the TITAN ion source is the use of two kinds of arc discharges, each with cold cathodes, to produce plasma for ion beam extraction. Metal ions are generated by means of the vacuum arc in the metal vapor formed in cathode spots. Gas ions, on the other hand, are provided by a low-pressure constricted arc discharge. In a pulsed mode of operation the extraction voltage of the source ranges from 10 to 100 kV. The pulsed beam current for gas and metal ions is on the order of 1 A at pulse repetition rates up to 50 pulses per second and pulse duration of ∼400 μs. For dc operation and at an extraction voltage up to 10 kV, the ion current is as high as hundreds of milliamperes. This work outlines briefly the ion source, its design, and certain physical peculiarities observed when a high current ion beam is generated and transported.

The investigation described in this paper dealt with spectroscopic measurements of the near-cathode plasma in a low-pressure arc on a Mg cathode with a current of 100 A and a pulse of duration 150 µs. Information on the directed velocities of the heavy particles (ions and neutral species) has been obtained from measuring the Doppler shift and the broadening of the spectral lines. The electron density in the cathode flare has been estimated from the collisional broadening of the lines. The experimental data obtained support the validity of the potential hump model for treating the mechanism of fast-ion generation.

High-current electron beams with a current density of up to 100 A/cm2 generated by a plasma-cathode gas-filled diode at low accelerating voltages are studied. Two types of gas discharges are used to produce plasma in the cathode. With glow and arc discharges, beam currents of up to 150 A and 400 A, respectively, have been obtained at an accelerating voltage of 16 kV and at a pressure of 1–3·10−2 Pa in the acceleration gap. The ions resulting from ionization of gas molecules by electrons of the beam neutralize the beam charge. The charge-neutralized electron beam almost without losses is transported over a distance of 30 cm in a drift channel which is in the axial magnetic field induced by Helmholtz coils. The results of calculations for the motion of electrons of the charge-neutralized beam with and without axial external field are presented and compared with those of experiments.

Self sustained glow discharge with a hollow cathode was studied at high discharge currents (up to 30 A). Using a grid analyzer placed on the side flange of the hollow cathode, the ion and electron currents flowing in the cathode sheath were measured. At a discharge current of 30 A, pressure of 0.2-2 Pa, and plasma density of 10 11 cm -3 , the coefficient of secondary ion-electron emission γ calculated from the experimental data is found to be 0.1-0.15. The dependences of the plasma parameters on the area of the small anode placed inside the larger hollow cathode are determined.