Summary The paper aims to explain the differences found in the heat release rate measurements in a large sample of standard fire tests (EN 1363‐1). A total of 379 tests of vertical assemblies was investigated, all performed in furnace SPARK of the ITB Fire Testing Laboratory, in 2015‐2018. The assemblies were subdivided into two groups—wall assemblies and fire‐rated doors. These assemblies were also compared with the results of the test of a wall built with aerated autoclaved concrete blocks that was considered as the benchmark test. It was observed that walls built with highly insulated sandwich panels require less heat to maintain standard thermal exposure conditions (20%‐30% less) than their counterparts built from gypsum plasterboard or aluminium and fire‐rated glass. In case of doors, it was observed that combustible samples required significantly less heat than the benchmark case (40%‐70% less), which indicates that the combustion of the sample inside of the furnace was an additional, significant source of heat release, that may skew the qualitative assessment of their performance in fire. A more in‐depth discussion of the results is provided, with some ideas on the direction of further developments in fire testing.

No abstract

A b s t r a c tThis paper presents the main problems related to the fire resistance of aluminium glazed partitions. It discusses technical solutions used in partition systems with a specific fire resistance class, as well as a procedure and the general principles of classification of fire resistance for structures of this type. Moreover, the paper presents the comparison of fire resistance test results of glazed partition test specimens, depending on the volume of insulation inserts placed inside the aluminium structure profiles. To made the comparison the specimens with the same transom -mullion structure were tested with two filling solutions -with same profiles filled only in the middle part and fully filled.

<p>Sandwich panel is the material that is easy and quickly to install. Basing on a great experience in the area of determination of the fire resistance class of construction building elements the authors describe the properties and behavior of building elements made of the sandwich panels exposed to fire. The article presents the results of fire resistance tests carried out in accordance with EN 1364-1 non-bearing walls made of sandwich panels with use of different cores.</p>The following parameters were analyzed: temperature rise on unexposed side (I – thermal insulation), integrity (E) depending on the orientations and on the width of the sandwich panels, deflection depending on the thickness of the boards. Conclusions were made on the base of the analysis from fire resistance tests.

No abstract