No abstract

In recent years, transportation agencies and the general public alike are demanding increased considerations of sustainability in transport infrastructure. Warm mix asphalt (WMA) is developed for reducing energy consumptions and emissions in asphalt paving industry. In addition, the use of rubberized asphalt concrete (RAC) has proven to be economically and environmentally sound and effective in improving the performance of pavements around the world. The combination of WMA and RAC, namely WarmRAC, is a novel and promising paving technology that can realize pavement sustainability from principles to practices. This study summarizes the best practices and recent research findings on warm mix rubberized asphalt concrete, including mix design, construction techniques, performance evaluation, feasibility of recycling, and environmental and economic benefits. Although most research findings to date about WarmRAC are positive, it still has a long way for WarmRAC to be fully adopted worldwide. Therefore, life cycle assessment including environmental and economic impacts, and long-term performance of WarmRAC need further research with involvement of transportation agencies, industry and academia.

The microstructure and chemical composition of asphalt binders have a significant effect on their rheological properties and, therefore, their performance as road paving binders. This study aims to investigate the effects of warm-mix asphalt (WMA) additives, organic type and chemical type, on the rheological properties and chemical internal structure of base asphalt and crumb rubber modified asphalt (CRMA). A set of dynamic shear rheometer (DSR) tests was conducted to obtain the rheological parameters (e.g., complex viscosity, complex modulus, phase angle) of asphalt binders. The flow activation energy was calculated from Arrhenius equation based on viscosity data to rank the thermal susceptibility. Black diagrams and master curves of complex modulus and phase angle were utilized to analyze the rheological properties. The molecular weight distributions of asphalt binders were inverted from the phase angle master curve to evaluate the molecular weight characteristics. It was found that the the addition of crumb rubber into base asphalt improves the rheological properties of enhanced modulus and elasticity. Organic and chemical types of WMA additives have different chemo-physical effects on both base asphalt and CRMA. Phase angle inversion method provides a powerful tool to monitor the molecular structure change and, therefore, the chemo-physical interactions of asphalt binders induced by modifications. Finally, there is a good correlation between flow activation energy and molecular weight.Recycling crumb rubber from end-of-life tires into asphalt paving has been applied for several decades for its tremendous economic and environmental benefits. It is reported that the incorporation of crumb rubber modifier (CRM) into asphalt binders can improve the overall performance of asphalt pavements (1, 2), such as improved aging and oxidation resistance, greater resistance to fatigue/thermal cracking and rutting, lower noise generation, higher skid resistance, and so forth. The above-improved performance of rubberized asphalt pavement relies on the interaction of CRM with asphalt. Depending on different interaction parameters (temperature, time and mixing rate, etc.), rubber-asphalt interaction is generally related to two mechanisms (3, 4): (a) swelling of CRM particles in asphalt matrix through absorbing the light aromatic oils of asphalt, and (b) degradation (devulcanization and depolymerization) of CRM through the release of its components into the liquid phase of asphalt.The improvement of the rheological properties of the rubberized asphalt binders has been observed after the interaction of CRM with asphalt (5). However, due to the high viscosity of rubberized binders, high mixing and compaction temperatures are required to achieve desirable workability and density of asphalt mixtures. In addition, the consequent high emissions and compromised work conditions during the construction process of rubberized asphalt pavement have been criticized (6). Warm-mix asphalt (WMA) technologies are developed to substantia...

Warm mix asphalt (WMA) technology has been increasingly utilised in rubberised asphalt pavements to reduce the production and compaction temperatures and the incidental fumes and odours. This study aims to investigate the high, intermediate and low-temperature performance of crumb rubber modified asphalt binders containing WMA additives. The asphalt-rubber interactions under various mixing combinations of temperature and time were investigated through both microscopic and mechanical methods to obtain the optimum mixing procedure. The effects of WMA additives (wax-based and chemical-based products) on the binder performance were investigated by multiple stress creep and recovery (MSCR) test, linear amplitude sweep (LAS) test and low-temperature frequency sweep test. Results show that rubberised asphalt binders significantly improve the binder performance of base asphalt at different temperature ranges. The effects of WMA additives on binder performance varied with base asphalt and rubberised asphalt binder. In addition, the nonrecoverable compliance difference was found not suitable to characterise the stress sensitivity of rubberised binders and the difference in the nonrecoverable compliance for an incremental change in applied stress was proved to be a more accurate alternative. For the cyclic LAS test, the failure energy was found to have a strong correlation with the predicted fatigue life using simplified viscoelastic continuum damage analysis and therefore can be considered as a simple indicator for binder fatigue performance ranking. Relaxation modulus and rate derived from low-temperature frequency sweep tests produced comparable results for ranking the low-temperature performance of different binders. It is feasible and promising to use a unified DSR test methodology to characterise the binder performance covering the whole service temperature range.

The chemical irreversible hardening of epoxy modified bitumen is affected by various physical factors and the successful application of this technology is directly linked with full understanding of chemo-rheological material characteristics. This study proposes a model to describe the material viscosity evolution during hardening of epoxy modified bitumen. The findings from numerical analyses performed to assess the mechanical response of epoxy modified bituminous binders are presented. Information of the chemical interaction of epoxy within a bituminous matrix was collected and all the influential factors have been determined. The proposed chemo-rheological model accounting for the polymerization of the epoxy in the bitumen was formulated and the sensitivity of material parameters, such as activation energy, reaction order and extent of hardening reaction until the gel point of epoxy modified binders, was demonstrated. Results of the analyses suggest that lower levels of activation energy increase the degree of hardening and the rate of viscosity development. By decreasing the hardening reaction until the gel point the achieved viscosity of epoxy modified bitumen was increased showing the importance of gel reaction extent on material viscosity evolution. The numerical studies have shown also that the polymerization rate in the epoxy modified bitumen is highly dependent on the temperature under various (non-) isothermal conditions. Also, the polymerization rate should be considered through all the material curing processes to avoid unwanted variations in the mechanical properties.