No abstract

The heterogeneous retreat of Thwaites glacier indicates complexities of ice melt processes taking place at the grounding zone.

No abstract

TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurements) is an innovative formation flying radar mission that opens a new era in spaceborne radar remote sensing. The primary objective is the acquisition of a global Digital Elevation Model (DEM) with unprecedented accuracy (12 m horizontal and 2 m vertical resolution). This goal is achieved by extending the TerraSAR-X synthetic aperture radar (SAR) mission by a second, TerraSAR-X like satellite (TDX) flying in close formation with TerraSAR-X (TSX). Both satellites form together a large singlepass SAR interferometer with the opportunity for flexible baseline selection. This enables the acquisition of highly accurate cross-track interferograms without the inherent accuracy limitations imposed by repeat-pass interferometry due to temporal decorrelation and atmospheric disturbances. Besides the primary goal of the mission, several secondary mission objectives based on along-track interferometry as well as new bistatic and multistatic SAR techniques have been defined, representing an important and innovative asset of the TanDEM-X mission. TanDEM-X is implemented in the framework of a public-private partnership between the German Aerospace Center (DLR) and EADS Astrium GmbH. The TanDEM-X mission was successfully launched in June 2010 and started operational data acquisition in December 2010. This paper provides an overview of the TanDEM-X mission and summarizes its actual status and performance. Furthermore, results from several scientific radar experiments will be presented that show the great potential of future formation flying interferometric SAR missions to serve novel remote sensing applications.

a b s t r a c tThe TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurement) mission comprises two nearly identical satellites: TerraSAR-X (TSX, launched in 2007), and TanDEM-X (TDX, launched in June 2010). The primary objective of the mission is to generate a worldwide and consistent digital elevation model (DEM) with an unprecedented accuracy. During the first 3 months after its launch, the TDX satellite was tested and calibrated in monostatic configuration with both satellites flying in 20 km along-track distance, and it was proven that the system and acquisition performance is almost identical to TSX. Both satellites were then brought into close formation of a few hundred meters distance to begin the bistatic commissioning phase. Since then, TSX and TDX have acted as a large single-pass radar interferometer, which overcomes the limitations imposed by repeat-pass interferometry and allow the acquisition of highly accurate cross-and along-track interferograms. In December 2010, TanDEM-X began with operational global acquisition: bistatic and monostatic SAR images are simultaneously acquired in stripmap mode and processed to interferograms, from which a global DEM is derived. The key parameter in estimating interferometric performance is the coherence, which is deeply evaluated in this paper. The impact of different decorrelation sources as well as the performance stability over time is investigated by means of statistical analyses and dedicated acquisitions on defined test sites, demonstrating the outstanding interferometric capabilities of the TanDEM-X mission. Ó