No abstract

The mechanical and metallurgical properties of weld play the most important role in the performance of welds which needs to be enhanced. The superimposing external magnetic field to the welding arc provided wonderful and favourable results for improving the shape and properties of weld. In this research, different configurations of specially designed electromagnets were used to investigate their effects on weld characteristics of SA 516 grade 70 welds. It is observed that 0-0-S-N configuration yielded maximum penetration (3.92 mm) compared with other configurations as well as the conventional gas tungsten arc welding (GTAW) process. Tensile test, Charpy impact test and microhardness were performed to investigate the mechanical properties and microstructure analysis was used to determine the metallurgical properties of the weld joints. The result shows that the tensile strength, impact strength, and microhardness of magnetically controlled GTAW (MCGTAW) weld was 620MPa, 275J and 198HV respectively which is 3.16%, 22.76%, and 1.51% higher than weld produced by GTAW process. It has also been observed that electromagnetic stirring refined the microstructure of the weld pool. The average grain size of MCGTAW weld was 31.035µm whereas 42.558µm average grain was obtained in conventional GTAW weld. The electromagnetic stirring enhanced the weld cooling rate resulting formation of more acicular ferrite which is desirable.