Detection and monitoring of esophageal cancer severity require an imaging technique sensitive enough to detect early pathological changes in the esophagus and capable of analyzing the esophagus over 360 °in a non‐invasive manner. Optoacoustic endoscopy (COE) has been shown to resolve superficial vascular structure of the esophageal lumen in rats and rabbits using catheter‐type probes. Although these systems can work well in small animals, they are unsuitable for larger lumens with thicker walls as required for human esophageal screening, due to their lack of position stability along the full organ circumference, sub‐optimal acoustic coupling and limited signal‐to‐noise ratio (SNR). In this work, we introduce a novel capsule COE system that provides high‐quality 360° images of the entire lumen, specifically designed for typical dimensions of human esophagus. The pill‐shaped encapsulated probe consists of a novel and highly sensitive ultrasound transducer fitted with an integrated miniature pre‐amplifier, which increases SNR of 10 dB by minimizing artifacts during signal transmission compared to the configuration without the preamplifier. The scanner rotates helically around the central axis of the probe to capture three‐dimensional images with uniform quality. We demonstrate for the first time ex vivo volumetric vascular network images to a depth of 2 mm in swine esophageal lining using COE. Vascular information can be resolved within the mucosa and submucosa layers as confirmed by histology of samples stained with hematoxylin and eosin and with antibody against vascular marker CD31. COE creates new opportunities for optoacoustic screening of esophageal cancer in humans.

Blood wicking in its steady-state form, i.e. the uniform distribution of blood cells in plasma, is completely different from that in its coagulated form on a porous surface like paper. The hydrophilic property of the cellulose leads to a significant wicking of the blood cells on paper fibers after rinsing with isotonic solution. The difference in the wicking length of the blood cells in steady state and that in the coagulated form could be considered as a criterion to recognize the blood type in a paper-based kit. However, owing to the molecular structure of the nitrocellulose, a better process occurs while separating the coagulated blood from the steady-state form of cells. Therefore, it is possible to use the nitrocellulose for the blood-typing kit which leads to a simpler way to diagnose a blood type. Two series of experiments were performed on nitrocellulose membrane. First, antibody solutions and blood samples were sequentially absorbed on nitrocellulose strips, allowed to interact, rinsed with an isotonic solution and distilled water, and image processing performed on a digital picture of the remaining blood cells. The efficiency of the agglutinated blood cell fixation was quantified by red color intensity. Then, it was demonstrated that there is no considerable difference in fixation of agglutinated blood cells with rinsing using isotonic and nonisotonic solutions. This fact can be a considerable advantage over paper since it can eliminate the probable mistake from using unisotonic solution for rinsing. Second, owing to the nonwicking property of the blood cells on the hydrophobic nitrocellulose fibers, we employed another diagnostic criterion and investigated nitrocellulose blood-typing prototypes. The nitrocellulose blood-typing kit provides more simple, sensitive and trustworthy assay for rapid blood typing in situations with no access to laboratory facilities.

Ultrasound imaging is affected by coherent noise or speckle, which reduces contrast and overall image quality and degrades the diagnostic precision of the collected images. Elevational angular compounding (EAC) is an attractive means of addressing this limitation, since it reduces speckle noise while operating in real-time. However, current EAC implementations rely on mechanically rotating a one-dimensional (1D) transducer array or electronically beam steering of two-dimensional (2D) arrays to provide different elevational imaging angles, which increases the size and cost of the systems. Here we present a novel EAC implementation based on a 1D array, which does not necessitate mechanically rotating the transducer. The proposed refraction-based elevational angular compounding technique (REACT) instead utilizes a translating cylindrical acoustic lens that steers the ultrasound beam along the elevational direction. Applying REACT to investigate phantoms and excised tissue samples demonstrated superior suppression of ultrasound speckle noise compared to previous EAC methods, with up to a two-fold improvement in signal- and contrast-to-noise ratios. The effects of elevational angular width on speckle reduction was further investigated to determine the appropriate conditions for applying EAC. This study introduces acoustic refractive elements as potential low cost solutions to noise reduction, which could be integrated into current medical ultrasound devices.