During the last decade, soft robotic systems, such as actuators and grippers, have been employed in various commercial applications. Due to the need to integrate robotic mechanisms into devices operating alongside humans, soft robotic systems concentrate increased scientific interest in tasks with intense human–robot interaction, especially for human-exoskeleton applications. Human exoskeletons are usually utilized for assistance and rehabilitation of patients with mobility disabilities and neurological disorders. Towards this direction, a fully functional soft robotic hand exoskeleton system was designed and developed, utilizing innovative air-pressurized soft actuators fabricated via additive manufacturing technologies. The CE-certified system consists of a control glove that copies the motion from the healthy hand and passes the fingers configuration to the exoskeleton applied on the affected hand, which consists of a soft exoskeleton glove (SEG) controlled with the assistance of one-axis flex sensors, micro-valves, and a proportional integral derivative (PID) controller. Each finger of the SEG moves independently due to the finger-dedicated motion control system. Furthermore, the real-time monitoring and control of the fabricated SEG are conducted via the developed software. In addition, the efficiency of the exoskeleton system was investigated through an experimental validation procedure with the involvement of healthy participants (control group) and patients, which evaluated the efficiency of the system, including safety, ergonomics, and comfort in its usage.

The industrial revolution 4.0 has led to a burst in the development of robotic automation and platforms to increase productivity in the industrial and health domains. Hence, there is a necessity for the design and production of smart and multi-functional tools, which combine several cutting-edge technologies, including additive manufacturing and smart control systems. In the current article, a novel multi-functional biomimetic soft actuator with a pneumatic motion system was designed and fabricated by combining different additive manufacturing techniques. The developed actuator was bioinspired by the natural kinematics, namely the motion mechanism of worms, and was designed to imitate the movement of a human finger. Furthermore, due to its modular design and the ability to adapt the actuator’s external covers depending on the requested task, this actuator is suitable for a wide range of applications, from soft (i.e., fruit grasping) or industrial grippers to medical exoskeletons for patients with mobility difficulties and neurological disorders. In detail, the motion system operates with two pneumatic chambers bonded to each other and fabricated from silicone rubber compounds molded with additively manufactured dies made of polymers. Moreover, the pneumatic system offers multiple-degrees-of-freedom motion and it is capable of bending in the range of −180° to 180°. The overall pneumatic system is protected by external covers made of 3D printed components whose material could be changed from rigid polymer for industrial applications to thermoplastic elastomer for complete soft robotic applications. In addition, these 3D printed parts control the angular range of the actuator in order to avoid the reaching of extreme configurations. Finally, the bio-robotic actuator is electronically controlled by PID controllers and its real-time position is monitored by a one-axis soft flex sensor which is embedded in the actuator’s configuration.