No abstract

Abstract--This study examines the influence of minerals and amorphous phases associated with kaolin and kaolinitic rocks on kaolinite crystallinity indices (KCI) derived from X-ray diffraction (XRD) data in order to select the best index for systematic studies of commercial kaolins or geological sequences. For this purpose, 8 kaolins of differing structural order were chosen and used to prepare mixtures containing different weight fractions of quartz, feldspar, illite, smectite, chlorite, halloysite and iron hydroxide and silica gels. An additional 17 samples of kaolin were also studied to test the results and evaluate the restrictions. KCIs used included Hinckley (HI), Range and Weiss (QF), Libtard (R2), Stoch (IK), Hughes and Brown (H&B) and Amigd et al. (full width at half maximum, FWHM), and the "expert system" of Plangon and Zacharie.Based on more than 15,000 KC1 determinations, the HI and QF are influenced by quartz, feldspar, iron hydroxide gels, illite, smectite and halloysite. IK can be used in the presence of quartz, feldspar and iron hydroxide and silica gels. Also, R2 is the only KCI that could be measured in the presence of halloysite; FWHM indices should not be used in the presence of chlorite and/or halloysite; and H&B should only be used with pure kaolinite samples. The "expert system" of Plan~on and Zacharie is strongly affected by the presence of other mineral phases, particularly with more than 25% of well-ordered kaolinite. Their system is less sensitive to other mineral phases when only disordered kaolinite is present, and it should not be used with kaolinite of medium order-disorder because the well-ordered phase is present in an inappreciable proportion (< 10%). KCI is only measurable in kaolinitic rocks if kaolinite is >20 wt% and the precision increases with an increase in the quantity of kaolinite. In all cases, the reliability will depend on the other minerals present. When a KCI can be measured accurately, the others can be obtained by using the empirical relationships reported in this paper.

No abstract

A geochemical and mineralogical study has allowed us to address the factors controlling distribution pattern, residence and behaviour of rare earth elements (REE) during kaolinization of Variscan granitoids in NW Spain. Mineral composition of the deeply weathered samples is dominated by kaolinite, with minor amounts of quartz, muscovite-illite, alkaline feldspar and traces of resistant minerals (rutile, ilmenite, zircon and monazite). Variable amounts of Si, Na, Ca, K, Rb, Cs, Ba, U and P were lost from the weathering profile, as a result of feldspars, mica and apatite breakdown, whereas Al, Fe, Ti, Zr, Th, Hf and REE were concentrated in the residual kaolin. Chondrite-normalized REE patterns of the kaolins show an overall enrichment of light REE (LaN/SmN = 1.22–2.53), heavy REE depletion (GdN/YbN = 2.42–15.10) and a strong negative Eu anomaly (Eu/Eu* = 0.11–0.25), probably inherited from the parent granite. Nevertheless, the normalization to the parent granite reveals some REE fractionation and increasing positive Eu anomalies with advancing weathering, in response to the breakdown of feldspars. Different grain-size fractions show similar REE distribution patterns, but differ in concentration levels. Although the fine fractions are the most important REE reservoir, there is no positive correlation with clay mineralogy. The correlative behaviour among P2O5, Th and REE in the <2 mm fraction suggests that monazite plays a dominant role controlling the REE budget in the weathering profile.

AB ST R ACT : The determination of kaolinite order-disorder by X-ray diffraction is problematic due to overlapping peaks from associated kaolin minerals and X-ray amorphous phases. This paper presents a new index (Aparicio-Galán-Ferrell index À AGFI), measured on 02l and 11l reflections after decomposing individual peaks in the complex diffraction band in an effort to reduce interferences. The new index was tested with three kaolins, of varying structural order, and their admixtures containing different percentages of quartz, feldspar, illite, smectite, chlorite, halloysite and Fe hydroxides and silica gels. The AGFI is highly correlated with the percentage of low-defect kaolinite and the Hinckley Index. It is not as prone to interference by associated minerals and X-ray amorphous phases as other indices. The AGFI can be used to determine kaolinite order-disorder in a wide variety of kaolins and kaolinitic rocks; the only prerequisite is that the kaolinite content should be >10 wt.% in order for the results to be reproducible.