This paper presents very reliable and stable micromirrors made of hydrogenated microcrystalline SiGe (µc-SiGe:H) at temperatures that would allow processing above standard CMOS circuitry. Very flat micro-mirrors with sizes ranging between 7.5x7.5 and 16x16 µm 2 size and submicron hinges are fabricated. No hinge creep is observed over a period of 20 days and no fatigue damage is seen after 5x10 10 cycles.

We demonstrate multi-cycle terahertz (MC-THz) generation in a 15.5 mm long periodically poled rubidium (Rb)-doped potassium titanyl phosphate (Rb:PPKTP) crystal with a poling period of 300 µm. By cryogenically cooling the crystal to 77 K, up to 0.72 µJ terahertz energy is obtained at a frequency of 0.5 THz with a 3 GHz bandwidth. A maximum internal optical-to-terahertz conversion efficiency of 0.16% is achieved, which is comparable with results achieved using periodically poled lithium niobate crystal. Neither photorefractive effects nor damage was observed with up to 900 m J / c m 2 , showing the great potential of Rb:PPKTP for multi-millijoule-level MC-THz generation.

A single-photon-counting mid-infrared LIDAR is presented. 2.4 µm mid-infrared photons were up-converted to 737 nm by intra-cavity mixing in a periodically poled rubidium-doped K T i O P O 4 crystal inside a N d : Y V O 4 laser. The up-converted photons were detected by a Si single-photon avalanche photodiode (SPAD). A temporal resolution of 42 ps and a dark count rate of 500 Hz were achieved, limited by the SPAD and ambient light leakage. It allowed for detection of two targets separated by only a few millimeters. This technique is easily extendable to longer wavelengths, limited primarily by the nonlinear crystal transparency.

Intense ultrashort pulse lasers are used for fs resolution pumpprobe experiments more and more at large scale facilities, such as free electron lasers (FEL). Measurement of the arrival time of the laser pulses and stabilization to the machine or other sub-systems on the target, is crucial for high time-resolution measurements. In this work we report on a single shot, spectrally resolved, non-collinear cross-correlator with sub-fs resolution. With a feedback applied we keep the output of the TW class Ti:sapphire amplifier chain in time with the seed oscillator to ~3 fs RMS level for several hours. This is well below the typical pulse duration used at FELs and supports fs resolution pump-probe experiments. Short term jitter and long term timing drift measurements are presented. Applicability to other wavelengths and integration into the timing infrastructure of the FEL are also covered to show the full potential of the device.

No abstract