Algae are an attractive biofuel feedstock because of their fast growth rates and improved land use efficiency when compared with terrestrial crops. Process train components needed to produce algal biofuels include (1) cultivation, (2) harvesting, and (3) conversion into usable fuel. This paper compares various process train options and identifies knowledge gaps presently restricting the production of algal biodiesel and algae-derived biogas. This analysis identified energyintensive processing and the inability to cultivate large quantities of lipid-rich algal biomass as major obstacles inhibiting algal biodiesel production. Anaerobic digestion of algal biomass requires fewer process train components and occurs regardless of lipid content. In either scenario, the use of wastewater effluent as a cultivation medium seems necessary to reduce greenhouse gas emissions and maximize water use efficiency. Furthermore, anaerobically digesting algal biomass generated from lowtechnology wastewater treatment processes represents an appropriate technology approach to algal biofuels that is poorly investigated. Coupling these processes can improve global health by improving sanitation, while providing a cleaner burning biogas alternative to indoor biomass cooking systems typical of less-developed areas. Water Environ. Res., 83, 326 (2011).

Current methods to remove algae from a liquid medium are energy intensive and expensive. This study characterized algae contained within a wastewater oxidation pond and sought to identify a more efficient harvesting technique. Analysis of oxidation pond wastewater revealed that algae, consisting primarily of Chlorella and Scenedesmus, composed approximately 80% of the solids inventory during the study period. Results demonstrated that suspended air flotation (SAF) could harvest algae with a lower air:solids (A/S) ratio, lower energy requirements, and higher loading rates compared to dissolved air flotation (DAF) (P , 0.001). Identification of a more efficient algal harvesting system may benefit wastewater treatment plants by enabling cost effective means to reduce solids content of the final effluent. Furthermore, use of SAF to harvest commercially grown Chlorella and Scenedesmus may reduce manufacturing costs of algal-based products such as fuel, fertilizer, and fish food. Water Environ. Res., 81, 702 (2009).

OMEGA is a system for cultivating microalgae using wastewater contained in floating photobioreactors (PBRs) deployed in marine environments and thereby eliminating competition with agriculture for water, fertilizer, and land. The offshore placement in protected bays near coastal cities co-locates OMEGA with wastewater outfalls and sources of CO 2-rich flue gas on shore. To evaluate the feasibility of OMEGA, microalgae were grown on secondary-treated wastewater supplemented with simulated flue gas (8.5% CO 2 V/V) in a 110-liter prototype system tested using a seawater tank. The flow-through system consisted of tubular PBRs made of transparent linear low-density polyethylene, a gas exchange and harvesting column (GEHC), two pumps, and an instrumentation and control (I&C) system. The PBRs contained regularly spaced swirl vanes to create helical flow and mixing for the circulating culture. About 5% of the culture volume was continuously diverted through the GEHC to manage dissolved oxygen concentrations, provide supplemental CO 2 , harvest microalgae from a settling chamber, and add fresh wastewater to replenish nutrients. The I&C system controlled CO 2 injection and recorded dissolved oxygen levels, totalized CO 2 flow, temperature, circulation rates, photosynthetic active radiation (PAR), and the photosynthetic efficiency as determined by fast repetition rate fluorometry. In two experimental trials, totaling 23 days in April and May 2012, microalgae productivity averaged 14.1 ± 1.3 grams of dry biomass per square meter of PBR surface area per day (n = 16), supplemental CO 2 was converted to biomass with >50% efficiency, and >90% of the ammonia-nitrogen was recovered from secondary effluent. If OMEGA can be optimized for energy efficiency and scaled up economically, it has the potential to contribute significantly to biofuels production and wastewater treatment.

The influence of PBR composition [clear polyurethane (PolyU) vs. clear linear low-density polyethylene (LLDPE) (top) and black opaque high-density polyethylene (bottom)] and shape (rectangular vs. tubular) on biofouling and the influence of biofouling on algae productivity were investigated. In 9-week experiments, PBR biofouling was dominated by pennate diatoms and clear plastics developed macroalgae. LLDPE exhibited lower photosynthetic-active-radiation (PAR) light transmittance than PolyU before biofouling, but higher transmittance afterwards. Both rectangular and tubular LLDPE PBRs accumulated biofouling predominantly along their wetted edges. For a tubular LLDPE PBR after 12 weeks of biofouling, the correlation between biomass, percent surface coverage, and PAR transmittance was complex, but in general biomass inversely correlated with transmittance. Wrapping segments of this biofouled LLDPE around an algae culture reduced CO2 and NH3-N utilization, indicating that external biofouling must be controlled.