Non-toxic alternatives to lead halide perovskites are highly sought after for applications in optoelectronics. Blue-luminescent materials are especially demanded as they could be used to prepare white light-emitting diodes, with important potential applications in lighting systems. However, wide bandgap blue emitters with high photoluminescence quantum yields (PLQY) are typically more difficult to obtain as compared to green-or red-emitting ones. Here, we prepared two series of inorganic cesium copper halides, with the general formulas Cs3Cu2X5 and CsCu2X3 (X = Cl, Br, I, and mixtures thereof) by dry mechanochemical synthesis at room temperature. X-ray diffraction demonstrates quantitative conversion of binary precursors into the desired ternary structures and good halide mixing in single-phase compounds. We identified Cs3Cu2I5 as the most promising material as it maintains blue luminescence centered at 442 nm with high PLQY (>40%) after several days in air (Cs3Cu2Cl5 shows significantly higher PLQY over 80% but is unstable in air). Based on this, we fabricated homogeneous and pinhole-free Cs3Cu2I5 thin films by thermal single-source vacuum deposition. Crystalline phase and photoluminescence are maintained in the thin films, validating that these low-toxicity materials can be synthesized and processed by fully solvent-free routes for a widespread implementation in optoelectronic devices. EXPERIMENTAL SECTIONMaterials. Cesium chloride (CsCl, > 99 %), cesium bromide (CsBr, > 99 %) and cesium iodide (CsI, > 99 %) were purchased from TCI.non-exposed and exposed powders; variation in PLE and PL wavelengths of Cs3Cu2X5 powders; XRD and PL spectra of solution processed thin-films; SEM image of thin-film by SSVD of Cs3Cu2I5.

Solvent-free mechanochemical synthesis of phase-pure inorganic halide perovskites is investigated in depth revealing several beneficial and detrimental effects of ball-milling.

Cs2AgBiBr6 has been proposed as a promising lead-free and stable double perovskite alternative to hybrid and lead-based perovskites. However, the low solubility of precursors during wet synthesis, or the distinct volatility of components during evaporation, results in complex multistep synthesis approaches, hampering the widespread employment of Cs2AgBiBr6 films. Here, we present pulsed laser deposition of Cs2AgBiBr6 films as a dry, single-step and single-source deposition approach for high-quality film formation. Cs2AgBiBr6 powders were prepared by mechanochemical synthesis and pressed into a solid target maintaining phase purity. Controlled laser ablation of the double perovskite target in vacuum and a substrate temperature of 200 °C results in the formation of highly crystalline Cs2AgBiBr6 films. We discuss the importance of deposition pressure to achieve stoichiometric transfer and of substrate temperature during PLD growth to obtain high-quality Cs2AgBiBr6 films with grain sizes > 200 nm. This work demonstrates the potential of PLD, an established technique in the semiconductor industry, to deposit complex halide perovskite materials while being compatible with optoelectronic device fabrication, such as UV and X-ray detectors.