Autonomous lightweight flapping-wing robots show potential to become a safe and affordable solution for rapidly deploying robots around humans and in complex environments. The absence of propellers makes such vehicles more resistant to physical contact, permitting flight in cluttered environments, and collaborating with humans. Importantly, the provision of thousands of species of birds that have already mastered the challenging task of flapping flight is a rich source of solutions. However, small wing flapping technology is still in its beginnings, with limited levels of autonomy and physical interaction capability with the environment. One significant limitation to this is the low payload available. Here we show the Eagle-inspired Flapping-wing robot E-Flap, a 510g novel design capable of a 100% of payload, exceeding the requirement of the computing and sensing package needed to fly with a high degree of autonomy. The concept is extensively characterized, both in a tracked indoor space and in outdoor conditions. We demonstrate flight path angle of up to 50 • and velocities from as low as 2 m/s to over 6m/s. Overall, the robotic platform has been proven to be reliable, having performed over 100 flights. Through mechanical and electronics advances, the E-Flap is a robust vehicle prototype and paves the way towards flapping-wing robots becoming a practical fully autonomous flying solution. Video attachment: https://youtu.be/GpAa176TMf0.

This paper presents the design, modelling and control of a multirotor for inspection of bridges with full contact. The paper analyzes the aerodynamic ceiling effect when the aerial robot approaches the bridge surface from below, including its aerodynamic characterization using Computational Fluid Dynamics (CFD). The proposed multirotor design takes the modelled aerodynamic effects into account, improving the performance of the aerial platform in terms of the stability and position accuracy during the inspection. Nonlinear attitude and position controllers to manage the aerodynamic effects are derived and tested. Last, outdoor experiments in a real bridge inspection task have been used to validate the system, as well as, the controller and the aerodynamic characterization. The experiments carried out also include a complete autonomous mission of the aerial platform during a structural assessment application.

No abstract

This paper presents the design and development of a winged aerial robot with bimanual manipulation capabilities, motivated by the current limitations of aerial manipulators based on multirotor platforms in terms of safety and range/endurance. Since the combination of gliding and flapping wings is more energy efficient in forward flight, we propose a new morphology that exploits this feature and allows the realization of dexterous manipulation tasks once the aerial robot has landed or perched. The paper describes the design, development, and aerodynamic analysis of this winged aerial manipulation robot (WAMR), consisting of a small-scale dual arm used for manipulating and as a morphing wing. The arms, fuselage, and tail are covered by a nylon cloth that acts as a cap, similar to a kite. The three joints of the arms (shoulder yaw and pitch, elbow pitch) can be used to control the surface area and orientation and thus the aerodynamic wrenches induced over the cloth. The proposed concept design is extended to a flapping-wing aerial robot built with smart servo actuators and a similar frame structure, allowing the generation of different flapping patterns exploiting the embedded servo controller. Experimental and simulation results carried out with these two prototypes evaluate the manipulation capability and the possibility of gliding and flying.

Inspired by the efficiency of soaring birds in crossing very large distances with barely flap their wings, this work presents a simple model of UAV that, adopting the capabilites of these animals, could improve the existent multi-rotor devices, not only in efficiency but also in safety and accessibility. Thus, simple analytical approximations to reproduce the behavior of flapping wings UAVs are explored, expecting their integration in on-board CPUs to be solved in real-time flight episodes. A comparison between gliding and wing flapping with these models indicates that the thrust generated by wingstrokes should be controlled in further studies in order to mitigate the oscillations along the path of the vehicle. The geometric parameters of the ornithopter are found to be decisive in this sense, so special attention should be paid during the design stage.