Selective/preferential milling of printed circuit board (PCB) particles followed by non-destructive characterization of the mill products was performed in order to understand the effects of different feed masses into a hammer mill and different milling time on the metal recovery and enrichment ratio. Those are important variables affecting and determining the process performance and capacity. The milling tests and elemental assay characterization were conducted by using a hammer mill and a portable X-ray fluorescence analysis (XRF), respectively. The results showed the preferential metal concentration/enrichment was achieved for several elements and their degree was varied depending on the parameters. Using the experimental data, predictive models of metal recovery were developed and the global trend of metal recoveries was observed under different mill feed and milling time and discussed.

This work aimed to characterize the deportment/concentration and liberation/association of the metals and light elements within mechanically processed waste printed circuit boards (PCBs) that hold the complex and heterogeneous structure and distribution of different material components. Waste PCBs passed through a series of mechanical processing (i.e., comminution and sieving) for metal recovery and were then characterized without further destroying the particles in order to capture their heterogeneity. The characterizations were performed in a laboratory and large-scale neutron facility. The results obtained with a portable X-ray fluorescence spectroscopy and prompt gamma activation analysis were compared and confirmed the good agreement and complementarities in general. The advantages and disadvantages of the two different methods were identified and discussed in this paper, in relation to their application to the analysis of mechanically processed PCB particles.