Hyperspectral light detection and ranging (LiDAR) (HSL) combines the characteristics of hyperspectral imaging and LiDAR techniques into a single instrument without any data registration. It provides more information than hyperspectral imaging or LiDAR alone in the extraction of vegetation physiological and biochemical parameters. However, the laser pulse intensity is affected by the incident angle, and its effect on HSL has not yet been fully explored. It is important for employing HSL to investigate vegetation properties. The aim of this paper is to study the incident angle effect of leaf reflectance with HSL and build a model about this impact. In this paper, we studied the angle effect of leaf reflectance from indoor HSL measurements of individual leaves from four typical tree species in Beijing. We observed that (a) the increasing of incident angle decreases the leaf reflectance; (b) the leaf spectrum observed by HSL from 650 to 1000 nm with 10 nm spectral resolution (36 channels) are consistent with those that measured by Analytica Spectra Devices (ASD) spectrometer (R2 = 0.9472 ~ 0.9897); (c) the specular reflection is significant in the red bands, and clear non-Lambertian characteristics are observed. In the near-infrared, there is little specular reflection, but it follows the Lambert-scattering law. We divided the whole band (650–1000 nm) into six bands and established an empirical model to correct the influence of angle effect on the reflectance of the leaf for HSL applications. In the future, the calibration of HSL measurements applied for other targets will be studied by rigorous experiments and modelling.

Digital maps of road networks are a vital part of digital cities and intelligent transportation. In this paper, we provide a comprehensive review on road extraction based on various remote sensing data sources, including high-resolution images, hyperspectral images, synthetic aperture radar images, and light detection and ranging. This review is divided into three parts. Part 1 provides an overview of the existing data acquisition techniques for road extraction, including data acquisition methods, typical sensors, application status, and prospects. Part 2 underlines the main road extraction methods based on four data sources. In this section, road extraction methods based on different data sources are described and analysed in detail. Part 3 presents the combined application of multisource data for road extraction. Evidently, different data acquisition techniques have unique advantages, and the combination of multiple sources can improve the accuracy of road extraction. The main aim of this review is to provide a comprehensive reference for research on existing road extraction technologies.

Hyperspectral LiDAR (HSL) is a new remote sensing detection method with high spatial and spectral information detection ability. In the process of laser scanning, the laser echo intensity is affected by many factors. Therefore, it is necessary to calibrate the backscatter intensity data of HSL. Laser incidence angle is one of the important factors that affect the backscatter intensity of the target. This paper studied the radiometric calibration method of incidence angle effect for HSL. The reflectance of natural surfaces can be simulated as a combination of specular reflection and diffuse reflection. The linear combination of the Lambertian model and Beckmann model provides a comprehensive theory that can be applied to various surface conditions, from glossy to rough surfaces. Therefore, an adaptive threshold radiometric calibration method (Lambertian–Beckmann model) is proposed to solve the problem caused by the incident angle effect. The relationship between backscatter intensity and incident angle of HSL is studied by combining theory with experiments, and the model successfully quantifies the difference between diffuse and specular reflectance coefficients. Compared with the Lambertian model, the proposed model has higher calibration accuracy, and the average improvement rate to the samples in this study was 22.67%. Compared with the results before calibration with the incidence angle of less than 70°, the average improvement rate of the Lambertian–Beckmann model was 62.26%. Moreover, we also found that the green leaves have an obvious specular reflection effect near 650–720 nm, which might be related to the inner microstructure of chlorophyll. The Lambertian–Beckmann model was more helpful to the calibration of leaves in the visible wavelength range. This is a meaningful and a breakthrough exploration for HSL.