In recent years, the development of electronic skin and smart wearable body sensors has put forward high requirements for flexible pressure sensors with high sensitivity and large linear measuring range. However, it turns out to be difficult to increase both of them simultaneously. In this paper, a flexible capacitive pressure sensor based on a porous carbon conductive pastepolydimethylsiloxane composite is reported, the sensitivity and the linear measuring range of which were developed using multiple methods including adjusting the stiffness of the dielectric layer material, fabricating a microstructure and increasing the dielectric permittivity of the dielectric layer. The capacitive pressure sensor reported here has a relatively high sensitivity of 1.1 kPa −1 and a large linear measuring range of 10 kPa, making the product of the sensitivity and linear measuring range 11, which is higher than that of the most reported capacitive pressure sensors to our best knowledge. The sensor has a detection of limit of 4 Pa, response time of 60 ms and great stability. Some potential applications of the sensor were demonstrated, such as arterial pulse wave measuring and breath measuring, which shows it as a promising candidate for wearable biomedical devices. In addition, a pressure sensor array based on the material was also fabricated and it could identify objects in the shape of different letters clearly, which shows promising application in future electronic skins.

Electronic skin (e‐skin) integrating pressure sensors and strain sensors has shown great potential applications in smart robotics and healthcare monitoring for their flexibility and wearability. However, making the sensor low cost and highly durable for industrialization and commercialization is still a problem to be addressed. An embedded 3D printing technology is developed based on novel thermosetting printing ink which is prepared using the Ecoflex and carbon nanoparticles. The properties of the printing ink including printability and electrical conductivity are first studied and then optimized. By using this technology, a glove‐shaped e‐skin integrating both strain sensors and pressure sensors is fabricated, and the properties of the sensors are studied. Both types of sensors have excellent stability and reliability which are verified by multiple long‐term measurements (10 000 testing cycles). Specifically, the sensors possess a great shock resistance and high durability which are significant for application in real life. Furthermore, some applications for human activity monitoring and personal healthcare are demonstrated, including complex gesture recognition using 15 strain sensors, hardness sensing using pressure sensors coupled with strain sensors, and arterial pulse measurement using pressure sensors, which are promising for smart robotic sensing and wearable biomedical devices.

This paper introduces a new nanoscale slot waveguide using organic material, graphene, and silicon-based materials. The physical mechanism of additional biased voltage can improve the performance of graphene-related waveguide, the proposed waveguide exhibits tunable performance including effective refractive index and dispersion without changing its structure and geometric dimension, which contributes to the practical value in future complex signal processing system. Based on the waveguide, wavelength conversion based on four-wave mixing is theoretically investigated in the near-infrared region and the tunable wavelength conversion is realized. These research results will have potential in the fields of data transmission and optical communications and help researchers deeply understand the physical mechanisms and nonlinear effects about the optical pulse generation processes and signal processing.