Deep resource extraction has been affected by the complex geological environment of "three highs and one disturbance" for a long time. The surrounding rocks experience strong unloading stress disturbance during the underground resource extraction. The creep characteristics of the perimeter rocks are of great theoretical and practical value. Firstly, the triaxial pre-peak loading and unloading tests on the prepared samples are conducted on the intact rock samples using the TAW-200 rock mechanics test system. Then the rock samples with different degrees of pre-peak unloading damage were prepared under the condition of pre-peak yield. Finally, the uniaxial creep tests were carried out to study the uniaxial creep mechanical properties. The results show that the wave velocities of the damaged rock samples are reduced to different degrees compared with those of the intact rock samples, the creep of the pre-peak unloading damaged rock has a time-dependent damage effect, and the study results are similar to those of the conventional uniaxial creep test of the white sandstone. The instantaneous strain at all stress levels of the damaged rock samples increased gradually with the stress level, which is consistent with the non-linear functional relationship; Based on the time-dependent damage effect, the two-parameter Weibull distribution function was introduced into the West Plains viscoelasticity model, and a creep damage model for white sandstone was proposed. The improved Nishihara model can simulate the uniaxial creep characteristics of each damaged rock sample at various stress levels.

Deep resource extraction is subjected to the complex geological environment of "three highs and one disturbance" for a long time. The surrounding rocks experience strong unloading stress disturbance during the underground resource extraction. The creep characteristics of the perimeter rocks are of great theoretical and practical value. Firstly, the triaxial pre-peak loading and unloading tests on the prepared samples are conducted on the intact rock samples using the TAW-200 rock mechanics test system. Then the rock samples with different degrees of pre-peak unloading damage are prepared under the condition of pre-peak yield. Then uniaxial creep tests were carried out to study the uniaxial creep mechanical properties. The results show that the wave velocities of the damaged rock samples are reduced to different degrees compared with those of the intact rock samples; The creep of the pre-peak unloading damaged rock has a time-dependent damage effect, and the study results are similar to those of the conventional uniaxial creep test of the white sandstone. The instantaneous strain at all stress levels of the damaged rock samples increased gradually with the stress level, and all conformed to the non-linear functional relationship; based on the time-dependent damage effect. The two-parameter Weibull distribution function was introduced into the West Plains viscoelasticity model, and a creep damage model for white sandstone was proposed. The improved Nishihara model can simulate the uniaxial creep characteristics of each damaged rock sample at various stress levels.