No abstract

We present a slope-assisted BOTDA system based on the vector stimulated Brillouin scattering (SBS) and frequency-agile technique (FAT) for the wide-strain-range dynamic measurement. A dimensionless coefficient K defined as the ratio of Brillouin phase-shift to gain is employed to demodulate the strain of the fiber, and it is immune to the power fluctuation of pump pulse and has a linear relation of the frequency detuning for the continuous pump and Stokes waves. For a 30ns-square pump pulse, the available frequency span of the K spectrum can reach up to 200MHz, which is larger than fourfold of 48MHz-linewidth of Brillouin gain spectrum. For a single-slope assisted BOTDA, dynamic strain measurement with the maximum strain of 2467.4με and the vibration frequency components of 10.44Hz and 20.94Hz is obtained. For a multi-slope-assisted BOTDA, dynamic measurement with the strain variation up to 5372.9με and the vibration frequency components of 5.58Hz and 11.14Hz is achieved by using FAT to extend the strain range.

A narrow bandwidth (2GHz) π-phase-shift flattop fiber Bragg grating (FBG) is proposed to achieve Brillouin optical time-domain analysis (BOTDA) for perfluorinated graded-index polymer optical fibers (GI-POFs) for the first time to best of our knowledge. Using the technique of BOTDA, we explore the evolution of mode coupling in perfluorinated GI-POFs by analyzing the Brillouin frequency shift (BFS) variation along the whole fiber, and compare them with that of silica graded index multimode fibers (GI-MMFs). The characteristics of mode coupling of GI-POFs and GI-MMFs were also investigated in terms of the speckle patterns at the output face of the two fibers. The results show that compared with silica GI-MMFs, GI-POFs exhibit more efficient mode coupling and the excellent ablility of mode scrambling regardless of alignment conditions.

We demonstrate a novel single-shot distributed Brillouin optical time domain analyzer (SS-BOTDA). In our method, dual-polarization probe with orthogonal frequency-division multiplexing (OFDM) modulation is used to acquire the distributed Brillouin gain spectra, and coherent detection is used to enhance the signal-to-noise ratio (SNR) drastically. Distributed temperature sensing is demonstrated over a 1.08 km standard single-mode fiber (SSMF) with 20.48 m spatial resolution and 0.59 °C temperature accuracy. Neither frequency scanning, nor polarization scrambling, nor averaging is required in our scheme. All the data are obtained through only one-shot measurement, indicating that the sensing speed is only limited by the length of fiber.

Brillouin-based optical fiber sensing has been regarded as a good distributed measurement tool for the modern large geometrical structure and the industrial facilities because it can demodulate the distributed environment information (e.g., temperature and strain) along the sensing fiber. Brillouin optical time domain analysis (BOTDA), which is an excellent and attractive scheme, has been widely developed thanks to its high performance in a signal-to-noise ratio, a spatial resolution, and sensing distance. However, the sampling rate of the classical BOTDA is severely limited by several factors (especially the serially frequency-sweeping process) so that it cannot be suitable for the quickly distributed measurement. In this work, we summarize some promising breakthroughs about the fast BOTDA, which can be named as an optical frequency comb technique, an optical frequency-agile technique, a slope-assisted technique, and an optical chirp chain technique.